Mifare S50/S70 Data Output - Jinmuyu Electronics JMY609A User Manual

Mifare & ISO14443A&ISO7816 http://www.jinmuyu.com

6.1 Mifare S50/S70 data output

E.g., as the chart, the RED NUMBER stores in the Block 4~6:
Set the "System Config" as following:
Not select Card SNR, not output the card number
Select Card data and Mifare S50/S70
Set the Mifare S50/S70 as following:
Select Mode 1, and set the continuous output mode
Set:
Start sector=01
Start block=00
Start byte=07
Copyright © 2003-2014 Jinmuyu Electronics Co., LTD. All rights reserved. 15/17