Table of Contents
Advertisement
Mifare & ISO14443A&ISO7816
output. Then set the output key assignments (4 optional keys: Tab, Enter, Down and Page Down) and
typing number.
Every block end: Set the output extra key after every block output ends.
Data end:
Set the output extra key after data output ends.
5.6 Parameter downloads
After finish all the configuration item, click "DownLoad" to download the parameters, if success, as
following:
If download success, and then click "Reset" to restart the device. After restart, the computer and
device disconnect. Then the computer will re-identify the device and turn to the reading card mode, as
following:
Copyright © 2003-2014 Jinmuyu Electronics Co., LTD. All rights reserved.
http://www.jinmuyu.com
12/17
Advertisement
Table of Contents
