Remove A User Account - NETGEAR WAX638E User Manual

Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX638E
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 43.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 25.
The Dashboard page displays.
4. Select Management > Configuration > System > Advanced > User Accounts.
The existing user accounts display.
5. To the right of the user account, change the existing settings as needed:
• User Name: Enter another user name.
• Password: Enter another password between 8 and 64 characters in length. The
password must contain at least one uppercase letter, one lowercase letter, and
one number. The following special characters are allowed:
! @ # $ % ^ & * ( )
• Privilege: From the menu, select Read-Write or Read-Only.
6. Click the Apply button.
Your settings are saved.

Remove a user account

You can remove a user account that you no longer need. You cannot remove the default
admin user account.
To remove a user account:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
Manage Access and Security 116 User Manual