NETGEAR WAX638E User Manual page 128

Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX638E
• You must separate entries with a comma.
• The file must be in text format (that is, with a .txt or .cfg extension).
For information about enabling neighbor AP detection, see Enable neighbor access
point detection and move access points to the Known AP List on page 125.
To import a list with MAC addresses of known neighbor access points in the Known
AP List:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 43.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 25.
The Dashboard page displays.
4. Select Management > Configuration > Security > Neighbor AP.
The page that displays lets you select the radio band (2.4 GHz, 5 GHz, or 6 GHz).
Manage Access and Security 128 User Manual