NETGEAR WAX638E User Manual page 38

Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX638E
The user name is admin. The default password is password. The user name and
password are case-sensitive.
6. Select the Web-browser radio button.
Note: After you save the basic settings that are shown on the page, the Day Zero
Easy Setup page no longer displays when you log in. Instead, a login window displays.
After you log in, the Dashboard page displays.
7. To let the access point check for the latest firmware, click the Check for Upgrade
button (the button is not shown in the previous figure).
If new firmware is available for the access point, we recommend that you upgrade
the firmware. After the firmware upgrade completes, the access point restarts. When
the access point is ready, depending on your situation, go back to Step 4 or Step 5
of this procedure.
8. Enter the settings that are described in the following table.
Install the Access Point in Your
Network and Access It for Initial
Configuration
38 User Manual