NETGEAR WAX638E User Manual page 204

Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX638E
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 43.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 25.
The Dashboard page displays.
4. Select Management > Configuration > Wireless > Basic.
The page that displays lets you select an SSID.
5. Click the > button to the left of the SSID.
The settings for the selected SSID display.
6. Scroll down and click the > Advanced tab.
The page expands.
7. Under Wireless Client Isolation, select one of the following radio buttons:
• Disable: Client isolation is disabled for the WiFi network. This is the default
setting.
• Enable: Client isolation is enabled for the WiFi network. The following check
boxes display:
If you select the Enable radio button, two check boxes display (see the following
steps).
8. If the Allow Access to AP UI check box displays: To prevent an admin user from
accessing the local browser UI over the WiFi network, clear the Allow Access to AP
UI check box.
By default, this check box is selected, allowing an admin user to access the local
browser UI over the WiFi network.
Note: If the management VLAN and WiFi network VLAN are identical (which they
are by default), an admin user can always access the local browser UI over a wired
network connection, even if you disable access over the WiFi network.
Manage the Advanced WiFi
Features for a WiFi network
204 User Manual