NETGEAR WAX638E User Manual page 131

Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX638E
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 25.
The Dashboard page displays.
4. Select Management > Configuration > Security > RADIUS Settings.
5. For each RADIUS server that you want to set up, configure the following settings:
• IPv4 Address: Enter the IPv4 address of the RADIUS server. The access point
must be able to reach this IP address.
• Port: Enter the number of the UDP port on the access point that is used to access
the RADIUS server. The default port number is 1812.
• Password: Enter the password (shared key) that is used between the access point
and the RADIUS server during the authentication or accounting process. By
default, the password is sharedsecret.
6. To enable accounting on the authentication servers, click the Enable Accounting
button so that the button displays blue.
7. Configure the following authentication settings, which apply to all RADIUS server
that you set up:
• Reauthentication time: Enter the interval in seconds after which the supplicant
(the WiFi client) must be reauthenticated with the RADIUS server. The default
interval is 3600 seconds (1 hour). Enter 0 to disable reauthentication.
Manage Access and Security 131 User Manual