Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Marantz WB4001T
Summary of Contents for Marantz WB4001T
- Page 1 Model WB4001T User Guide Tilt Wall Mount for 42” / 50” Plasma...
-
Page 2: Warning Statements
Failure to do so may result in damage to the flat panel display and could increase the risk of fire. At least two qualified people should perform the installation procedure. Injury and/or damage can result from dropping or mishandling the flat panel display. Warning Statements Contact Marantz with any questions - (630)-741-0300. -
Page 3: Table Of Contents
Warning Statements ...- 2 - PARTS LIST ...- 4 - Installation Tools ...- 4 - FINDING THE CENTER OF THE DISPLAY ...- 5 - POSITIONING THE MOUNTING BRACKETS ...- 6 - SECURING THE MOUNTING BRACKETS ...- 7 - WOODEN STUD LOCATION ...- 8 - MOUNTING POINT LOCATION ...- 9 - SECURING THE WALL PLATES ...- 10 - FLAT PANEL INSTALLATION ...- 11 -... -
Page 4: Parts List
NOTE: This wall mount is shipped with all proper installation hardware and components. Make sure that none of these parts are missing before beginning installation. If there are parts missing stop the installation and contact Marantz. Wall plate (Qty 2) -
Page 5: Finding The Center Of The Display
FINDING THE CENTER OF THE DISPLAY WARNING: PROPER INSTALLATION PROCEDURE BY QUALIFIED PERSONNEL AS OUTLINED IN THE INSTALLATION INSTRUCTIONS MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND POSSIBLE DAMAGE TO THE FLAT PANEL. WARNING: INVERT THE FLAT PANEL, PLACE IT ON A SOFT, FLAT SUFRACE TO PREVENT DAMAGE TO THE FLAT PANEL. -
Page 6: Positioning The Mounting Brackets
POSITIONING THE MOUNTING BRACKETS Step 3 Lay the mounting brackets (stamped arrows facing out) Figure 3 Mounting brackets Figure 3 Step 5 The mounting brackets are designed with a center of viewing guide on the side of them (Figure 5). Figure 5 - 6 - Step 4... -
Page 7: Securing The Mounting Brackets
SECURING THE MOUNTING BRACKETS Step 6 The Griplates™ have M4, M5, M6 and M8 hole patterns to fit the hardware that your flat panel requires. EXAMPLE: If your plasma uses M8 x 20 Phillip screws. Use the M8 mounting points (Figure 6). DIMPLES Figure 6 Step 7... -
Page 8: Wooden Stud Location
WOODEN STUD LOCATION Step 8 Using a (commercially available) wood stud finder, locate the 16" or 24" stud centers behind the wall. Once found, make a pencil marking on the center of the wood studs (Figure 8). NOTE: The wall plates have three 16" and one 24"... -
Page 9: Mounting Point Location
MOUNTING POINT LOCATION Step 10 Place the bottom portion of the wall plate to the reference line and mark the four (4) lag bolt mounting points through the wall plate slots on the wall. Level the wall plate with the reference arrow pointing up to the ceiling (Figure 10). -
Page 10: Securing The Wall Plates
SECURING THE WALL PLATES Step 12 – Wooden Studs Level and secure the plate to the wall with the reference arrow facing up to the ceiling. Secure the plate using the four (4) 5/16" lag bolts and flat washers (Figure 12). NOTE: Use a minimum diameter of 5/16”... -
Page 11: Flat Panel Installation
Step 15 WARNING: AT LEAST (2) QUALIFIED PERSONNEL ARE STRONGLY RECOMMENDED FOR INSTALLATION OF THIS PRODUCT. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY AND POSSIBLE DAMAGE TO THE FLAT PANEL Raise the flat panel with the mounting brackets secured to the flat panel and insert the top and bottom hooks from each bracket to the rods from the wall plates (Figure 15). -
Page 12: 10.0 Technical Specifications
10.0 TECHNICAL SPECIFICATIONS Dimensions are in Inches and ( 19.000 12.000 (482.6) (304.8) A. Wall plates B. Mounting brackets C. Griplate™ D. Mounting hardware E. M6 x 30 (mm) Phillip screws F. Wood stud G. 5/16” x 3” Lag screws and flat washers H. - Page 13 You can find your nearest authorized distributor or dealer on our website. Marantz America, Inc. 1100 Maplewood Drive, Itasca, IL 60143, U.S.A. U.S.A. is a registered trademark. - 13 -...
Need help?
Do you have a question about the WB4001T and is the answer not in the manual?
Questions and answers