HIKVISION DeepinView DS-2CD6425G0/F Series User Manual page 61

Steps:
1. Enter the security service configuration interface: Configuration > System >
Security > Advanced Security.
2. Check the checkbox of Enable Security Reinforce.
Note:
If Security Reinforce is enabled, certain functions are enabled by default, such as
Enable HTTPS, Enable HTTPS Browsing, TLS1.2 and websockets; certain
functions are disabled by default, such as websocket, ONVIF and 802.1x. For
802.1x, only TLS is supported. SHA256 algorithm is supported, MD5 algorithm
and SDK service are not supported.
3. Check the checkbox of Control Timeout Settings to enable control timeout
settings.
4. Slide to set the timeout as required.
5. Click Save.
Network Camera User Manual
Advance Security
60