Table of Contents
Advertisement
Shield Region
The shield region allows you to set the specific region in which the face capture will
not function. Up to 4 shield regions are supported.
Steps:
1. Click the hexagons sign
live view window, and right click to finish the area drawing.
Notes:
●
Polygon area (4 to 10 sides) sides is supported.
●
Click
to delete the drawn areas.
●
If the live view is stopped, there is no way to draw the shield regions.
2. Click Save to save the settings.
Rule
Steps:
1. Check the checkbox of Rule to enable rules of face capture.
2. Click the rectangle sign
distance of the drawn pupil will be displayed on the box below the live view.
The minimize pupil distance refers to the minimum square size composed by
the area between two pupils, and it is the basic standard for a camera to
identify a target.
3. Click the hexagons sign
capture to take effect. Draw area by left click end-points in the live view
Network Camera User Manual
to draw shield area by left click end-points in the
Draw Shield Area
to draw the minimum pupil distance. The
to draw the detection area you want the face
148
Advertisement
Table of Contents
