OSEE BCM-230 Series User Manual page 20

MAIN MENU SUB-MENU
MODE
WAVE OVER(G)
LIMIT
WAVE UNDER
LIMIT
LINE
TIME CODE
CLOSE CLOSE
CAPTION CAPTION
SDI CC LOG
I/P MODE
SUB IN
CONFIG
SUB IN
SELECT
PIP SIZE(G)
PIP POSTION(G)
BACKLIGHT(G)
AUTO
BCM-230 Series LCD Monitor
ITEMS
(G) Note: If the input is not SDI signal, it can be set but does not
*1
enable.
50-100
Note: If the input is not SDI signal, it can be set but does not
(G)
*1
enable.When it is set to 100, OVER LIMIT does not enable.
0-50
Note: If the input is not SDI signal, it can be set but does not
(G)
*1
enable.When it is set to 0, OVER LIMIT does not enable.
23-310-623 (when the Input format is 576i50 ;)
22-261-524 (when the Input format is 480i60 ;)
26-386-745 (when the Input format is 720p ;)
WAVE(G) 21-560-1123 (when the Input format is
1080i50,60/59.94,sf23/23.97 ;)
41-557-1120 (when the Input format is 1035i60 ;)
42-561-1121 (when the Input format is 1080p ;)
OFF, VITC, LTC, D-VITC
(G) Note: If the input is not SDI signal, it can be set but does not
*1
enable.
OFF, CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, TEXT4( in
(G) Y/C/NTSC signal)
*1
OFF,ON
NORMAL, FILM, FIELD
Note: If the input is DVI signal, it can be set but does not
enable.When it is set to 0, OVER LIMIT does not enable. It is
used to minimize the de-interlacing processing time delay and
(S)
*1
improves the quality of fast moving and fine details under
interlaced format.
NORMAL:2 full fields per frame,delay 1 frame time;
FIELD: Fast mode,1 field per frame,delay 1/2 frame time;
TYPE(G) OFF,PBP,PIP
In SDI1: SDI2,VIDEO1,VIDEO2,YC,YPBPR,HDMI,WAVE
FORM;
In SDI2: SDI1,VIDEO1,VIDEO2,YC,YPBPR,HDMI,WAVE
FORM;
In VIDEO1:SDI1,SDI2,YPBPR,HDMI;
(S)
*1
In VIDEO2: SDI1,SDI2,YPBPR,HDMI;
In YC: SDI1,SDI2,YPBPR,HDMI;
In YPBPR: SDI1,SDI2, VIDEO1,VIDEO2,YC,HDMI;
In HDMI: SDI1,SDI2, VIDEO1,VIDEO2,YC ,YPBPR;
SMALL,LARGE
BOT LEFT,BOT RIGHT,TOP RIGHT,TOP LEFT
0-15-30
OFF, ON
16
User Manual