Advertisement
Features of the Zapco AC~DC Power Supplies
Z-PS110B P100A (110~130 Volt)
Z-PS220I P100A (220~240 Volt)
Now you can power your Zapco Amplifier from a standard AC outlet with the new
Z-PS220I P100A and Z-PS110B P100A. Car Audio champions have been winning with
Zapco amps for over 40 years. This year we give audio enthusiasts a new product that is
both an accessory to the system and a tool for competitions. A low noise, high efficiency
AC to DC power converter made to Zapco's standards to drive Zapco amplifiers (or other
DC powered devices) from a standard 110V (Z-PS110B) or 220V (Z-PS220I) AC outlet.
Each one provides 100 amps of DC current variable from 9V to 16 V, and multiple supplies
can be "strapped" to give you up to 400 amps of current.
Whether it is in a workshop, office, home, or at a competition venue. Whether you want
to keep your battery strong in audio competitions, save your battery during long tuning
sessions, set up a test bench to evaluate audio systems, or compare the performance of
your car amplifier to that of your home amplifier.
These supplies will give you all the current you need, and housed in the Zapco competition
chassis, they will look sharp doing it.
Features include:
• Adjustable regulated output voltage from 9V~16V
• Remote panel-mount Volt Meter to monitor the output
• Up to 100 amps of current
• Units are "strappable" to combine up the 4 units, and provide up to 400 Amps of
current. Each unit includes the connection cable for strapping multiple supplies
• Temperature controlled cooling fans
• Thermal shut-off protection
• Over-current protection
• Pulse charging to inhibit battery sulfating (overcharging)
Fuse all connected devices as recommended by the manufacturer.
4
Important Safety Instructions
This manual contains important safety and operating instructions. To reduce the risk of
fire, electric shock, and injury to person or equipment; carefully read the following before
you use the power supply. Also, please read all cautionary markings on any product that
you will connect to the power supply.
Warnings:
• This power supply is not recommended for outdoor use
• Do not expose power supply to excessive moisture
• Fuse all connected devices as recommended by the manufacturer
• This power supply is not intended for use as a battery charger. Connecting to a
deeply discharged battery can cause the supply to go into current limit mode and
can damage the power supply
• This supply can be used alone or in conjunction with a battery or multiple batteries.
If used with a battery, the output will be automatically adjusted depending on
battery condition to avoid battery damage
• Batteries should not remain connected to the charger for extended periods of time
• The power supply should be operated from a standard 110V or 220V 50Hz~60Hz
AC Outlet (as indicated in model number). A minimum of 20 Amps will be required
• If required at a later date, the input supply voltage can be changed as per instructions
in this manual
• Avoid use of extension cords
• The power plug is polarized for safety, do not modify the power plug.
• Do not cover or block the power supply's cooling fans
If your unit should require service,
contact your dealer. Do not attempt
to service the unit.
5
Advertisement
