Marantz RC1200 User Manual page 39

MACRO: Adjusts the time interval between
transmissions of macro operations
When the
v
a displays MACRO, while LCD b displays
STEP.
One square (7) in LCD c is equivalent to an
interval of 0.5 seconds, allowing intervals of up
to 5 seconds to be set. The remote controller is
set at the factory with an interval of 1 second,
as indicated by (77&&&&&&&&). Adjust the
interval between transmission of operation
codes using the < and > Cursor buttons ⁄0 ,
then press the OK Cursor button ⁄0 .
• To cancel the setting, press any button
other than the Cursor button ⁄0 .
LIGHT: Adjusts the LCD display lighting
duration.
When the ^ or
TIME appears at LCD B. Every 7 at LCD C
represents a second, and a lighting duration
of up to 10 seconds can be set.
The unit is set at the factory with a duration of 5
seconds (77777&&&&&). When 0 is set, only
the LIGHTING button ⁄9 can be used to light
up the LCD display: no other buttons can be
used to perform this operation.
Press the < Cursor button ⁄0 to decrease the
lighting duration; conversely, press the >
button to increase it.
• After setting the duration, press the OK
Cursor button ⁄0 .
• To cancel the setting, press any button
except the Cursor button ⁄0 .
• To continue with the setting, press the ^ or
Cursor button ⁄0 .
Cursor button ⁄0 is pressed, LCD
Cursor button ⁄0 is pressed,
v
38
v