Marantz RC1200 User Manual page 22

Press the Function button , for which
2.
y o u w i s h t o p r o g r a m a s e r i e s o f
operations. In this case, let's use the
example of the laser disc player.
Press the LD Function button ,.
Example
The LCD A will display LD-M.
The characters displayed at LCD A are
as follows. However, when a function
name has been overwritten, "–M" appears
for the first 2 or 3 characters.
LD-M, DVD-M, TV-M, DSS-M, VCR-M,
AUX-M, TUN-M, CD-M, TP-M, AMP-M,
CDR-M (or MD-M for remote controller set
for MD).
• If a macro has already been set for the
selected function button, the LCD A
will blink. Also, the number of steps in
the macro is displayed on LCD C.
3. Press the buttons for the operations you
wish to program as a macro in the
sequence you want the macro to program
them. The name of the button pressed
appears on LCD A. The number of steps
in the macro is displayed on LCD C and
this number increases by 1 with each
button pressed.
For example, press LD, PLAY.
ENT
w
CH
DSS
q
L D
L D
CLEAR
AUTO
Each function button can be programmed
to perform up to 10 steps in sequence.
OK OK
DVD
C D
T V VCR
TUNER TAPE
MEMO GUIDE
DOLBY THX DTS
21
EN
VO
CD-R/MD
AUX
AMP
MUTE
HALL