Care And Cleaning - KitchenAid KSB6060FG Manual

PRODUCT USAGE
5
Using the Tamper: Remove the Ingredient-
measuring Cap only. Stir or press contents
down towards the blade. When finished,
replace the Ingredient-measuring Cap
before resuming blending.
7
After blending, flip the Start/Stop Toggle
Switch up or down to stop. Unplug the
Blender before removing Blender Jar.

CARE AND CLEANING

IMPORTANT: Allow the appliance to cool completely before putting on or taking off
parts, and before cleaning the appliance.
NOTE: To avoid damaging the Blender, do not immerse the blender base or cord in
water. To avoid scratching, do not use abrasive cleansers or scouring pads.
1
Empty the Blender Jar. Fill jar with 24 oz.
of hot water and add 3-4 drops of liquid
dishwashing detergent. Place the Lid on
the Blender Jar, and make sure the Blender
Jar is fully in place on the blender base.
W11593783A.indb 7 W11593783A.indb 7
6
The Pulse function may also be used on its
own as a separate blending function while
the Blender is in Standby mode.
NOTE: Allow the Blender to come to a
complete stop before removing the Lid and
pouring your blended ingredients.
2
Rotate the Control Dial to Max. Flip the
Start/Stop Toggle Switch up or down to
start. Run the Blender for 35 seconds. Flip
the Start/Stop Toggle Switch up or down
to stop. When the blade stops spinning,
pour out the soapy water, and rinse the
Blender Jar with warm water.
7
4/28/2022 10:41:50 AM 4/28/2022 10:41:50 AM