BABYTREND CS79C59A Owner's Manual
  1. Manuals
  2. Brands
  3. BABYTREND Manuals
  4. Car Seat
  5. CS79C59A
  6. Owner's manual

BABYTREND CS79C59A Owner's Manual

Infant car seat
Hide thumbs
Table of Contents

Advertisement

Quick Links

STOP
If you experience any difficulty in using this product, please
contact our customer service department at 1-800-328-
7363 between the hours of 8:00 a.m. and 4:30 p.m. Pacific
Standard Time for assistance. Please have your model
number and manufacturing date available when you call.
This information can be found on a small sticker on the
bottom of the product.
Carefully read and understand all instructions and
warnings in this manual. Failure to properly use
this Infant Car Seat incre
INJURY or DEATH in a sudden stop or crash.
KEEP INSTRUCTIONS FOR FUTURE USE.
Store this manual in the pocket provided on
Child Weight:
Copyright © 2017, Baby Trend, Inc.
Baby Trend, Inc.
13048 Valley Blvd.
Fontana CA 92335
Store this manual in
WARNING
the pocket provided
ases the risk
of SERIOUS
the side of the seat.
underneath the
Car Seat Cover.
ALLIE-35
®
INFANT CAR SEAT
4 to 35 lbs (1.82 to 15.8 kg)
Child Height:
32" or less (81.3 cm)
OWNER'S MANUAL
www.babytrend.com
ALLIE_35_101917U
1-800-328-7363
(8:00am ~ 4:30pm PST)
www.babytrend.com
WARNING
Carefully read and understand all instructions and
warnings in this manual. Failure to properly use
this Infant Car Seat increases the risk of SERIOUS
INJURY or DEATH in a sudden stop or crash.
KEEP INSTRUCTIONS FOR FUTURE USE.
Store this manual in the pocket provided on
the side of the seat.
ALLY - 35
INFANT CAR SEAT
Child Weight:
4 to 35 lbs (1.82 to 15.8 kg)
Child Height:
OWNER'S MANUAL
Copyright © 2021, Baby Trend, Inc.
™
32" or less (81.3 cm)
ALLY_35_110120U

Advertisement

Table of Contents
loading

Related Manuals for BABYTREND CS79C59A

Summary of Contents for BABYTREND CS79C59A

  • Page 1 ® INFANT CAR SEAT Child Weight: 4 to 35 lbs (1.82 to 15.8 kg) Child Height: 32” or less (81.3 cm) OWNER’S MANUAL www.babytrend.com Copyright © 2017, Baby Trend, Inc. ALLIE_35_101917U ALLY - 35 ™ INFANT CAR SEAT Child Weight: 4 to 35 lbs (1.82 to 15.8 kg)

  • Page 2: Table Of Contents

    5.6 Operation of the Carry Handle ............27 5.7 Attaching the Canopy ................. 28 5.8 Adjustment of the Shoulder Straps ............ 29 Low Birth Weight Adjustment ..............32 Para instrucciones en Español, conéctese a 5.9 Low Birth Weight Use ................ 32 www.babytrend.com o llamar al: 1-800-328-7363.

  • Page 3: Warnings To Alert You To Possible Dangers

    5. Proper use and routing of the seat belts in your vehicle is or register online at essential for proper installation. Not all vehicle seat belts will https://babytrend.com/pages/car-seat-product-registration For recall information, call the U.S. Government’s Vehicle adequately secure the Safety Seat.

  • Page 4: Safety Information

    Safety Safety SAFETY INFORMATION 3.2 About your vehicle • Proper installation of the Safety Seat in your vehicle and proper 3.1 About your child securing of your child in the Safety Seat are essential to ensure the safety of your child. Quick turns, sudden stops, or other •...

  • Page 5: About Active Air Bags

    Safety Safety 3.3 About Active Air Bags 3.5 About this Safety Seat NEVER PLACE THIS SAFETY SEAT IN A VEHICLE SEATING • This Safety Seat is constructed of plastic that can deform over LOCATION THAT HAS AN ACTIVE AIR BAG. If an Active time if left with any object in the seat while stored.

  • Page 6: About Use As A Carrier

    Safety Safety 3.6 About use as a carrier - DO NOT place items with string around a child’s neck, such as hood strings, pacifier cords, etc. Never Leave Your Child Unattended, even if they are asleep. - DO NOT suspend strings on or over carrier. Very often when you arrive at your destination you will find - DO NOT attach strings to toys.

  • Page 7: Selecting The Best Location For The Safety Seat

    Location Location SELECTING THE BEST LOCATION FOR • If the driver is the only adult in the vehicle and the child requires constant monitoring, then the forward seating position THE SAFETY SEAT may be used if there is no passenger side Active Air bag and all of the following requirements are met for this location.

  • Page 8: Check That The Vehicle Seat Belt Is Safe To Use

    Location Location • DO NOT place this Safety Seat in any vehicle seat belts systems that are not safe for use with the Safety seat that faces to the rear or to either side of Seat. These systems may look safe but their method of the vehicle (Fig.
  • Page 9 Location Location • DO NOT use a lap belt that stays loose after • DO NOT use a seat belt that is anchored on installed and locks only in a crash or sudden the seat more than 2 inches forward of the stop.
  • Page 10 Location Location Seat belt systems that are Adequate for use with the Safety This combination seat belt does not require a Seat: locking clip (Fig. 18-1). The following seat belt systems can be used with the Safety Seat • A lap/shoulder combination belt system provided, that all of the other requirements prescribed in these Fig.

  • Page 11: Safety Seat Features And Their Proper Use

    Features Features SAFETY SEAT FEATURES AND THEIR 5.2 Rear view of Model PROPER USE Harness Slots Locking Clip Carry Handle Canopy 5.1 5-Point Harness Owner’s Base/Stroller Moving Seat Manual Hook Back (Adjustable Holder Back Model) Seat Angle Canopy Indicator Harness Belt Seat Pad Handle...

  • Page 12: Base

    Features Features Your Safety Seat base can be installed with either the vehicle belt 5.3 Base or with the included LATCH Hooks attachment system. Attachment LATCH Locks Storage LATCH Connector storage in side Latch Belt Path for of base Connector Vehicle Belt Storage Installation...

  • Page 13: Use Of The Safety Seat With The Base

    Features Features Car Seat Removal from Base or Stroller 5.4 Use of the Safety Seat with the Base 1- Rotate Carry Handle to the carry position. • To attach the Safety Seat to the Base, Rebound 2- Locate the red release handle behind the head. align the Safety seat with the Base Position end of the car seat.

  • Page 14: Other Features

    Features Features Center 5.5 Other Features Bubble level indicator for use with Child 4-22lbs. Harness This Seat Angle Indicator We manufacturer several different styles is used to ensure that the of Safety Seat each with various levels of seat is installed at the proper features, adjustments, and weight and size degree of recline keep the Seat Angle...

  • Page 15: Operation Of The Carry Handle

    Features Features 5.6 Operation of the Carry Handle • Slowly rotate the handle to the desired position. The buttons WARNING should pop out and the handle should automatically lock into the new position (Fig. 28-1). Toys or other objects attached to carry handle can cause injury in a crash.

  • Page 16: Adjustment Of The Shoulder Straps

    Features Features 5.8 Adjustment of the Shoulder Straps 4. Loosen the harness straps by depressing the Harness Adjuster Button located below the flap just ahead of The Safety Seat features three height the Harness Buckle and pulling on the adjustments for the harness shoulder harness straps.

  • Page 17: Low Birth Weight Adjustment

    Features Features 1/2 to 1 inch above thigh You have three adjustment positions on the 5.9 Low Birth Weight Adjustment harness. Use Position A for a smaller child, and Position B or C for a larger child. The Crotch Shortening clip is only to If using Position A, loop B and C must be be used with children who’s weight is on top of the Belt Adjuster Plate (Fig.
  • Page 18 Features Features 1d. To thread the stamping back into 5. To shorten the buckle webbing length, thread Seat Cut-Away the strap slip the strap through the the anchor bracket through the slot forward of center by reversing steps 1b and 1c. the use position.

  • Page 19: Using Infant Restraint

    INFANT RESTRAINT INFANT RESTRAINT USING INFANT RESTRAINT In a crash, the safety seat provides no protection for your child unless the Harness Straps are properly 6.1 Securing your Child in the Safety Seat / Carrier installed according to these instructions. Make sure that the harness straps are properly adjusted and secured whenever using the Safety Seat, even when using as a carrier.

  • Page 20: For The 5-Point Harness

    INFANT RESTRAINT INFANT RESTRAINT 6.2 For the 5-Point Harness 3. Place the Safety Seat on a firm and level surface. Move the carry handle • Type A: Put the two buckle tongues together, to the non rocking position. Loosen overlaying the left buckle tongue onto the the Harness Straps by pulling on the right buckle tongue, and insert the two joined buckle tongues into the harness buckle on...

  • Page 21: Securing The Safety Seat Or Base In The Vehicle

    INSTALLATION INSTALLATION WARNING: 7.1 Preparation Toys or other objects 1. Park your vehicle on a level surface so that attached to carry handle can cause injury in a crash. Never the level indicator located on the left side of attach toys or other objects to handle when in vehicle. the Safety Seat will properly indicate the proper angle of recline of the seat.

  • Page 22: Installation Of The Safety Seat / Vehicle Belt Installation Of Base

    INSTALLATION INSTALLATION 7.2 Installation of the Safety Seat / Vehicle 4. See Fig. 41-2 for the proper threading of the vehicle belt through the Base and Fig. Belt Installation of Base: WARNING: 42-1 for the proper threading of the belt through the Safety Seat without the Base.
  • Page 23 INSTALLATION INSTALLATION 7. To tighten a lap belt only: 9. Alternate mode vs Recommended mode • An automatically retracted lap seat belt is tightened by feeding belt back into its retractor while pushing down hard on Fig. 43-1 the Safety Seat or Base. Make sure that the retractor locks the lap belt into place and that the belt remains very tight (Fig.
  • Page 24 INSTALLATION INSTALLATION 10. A lap/shoulder combination seat belt with a 11. If you are using the Base, check that buckle that can slide freely along the seat nothing is on top of the base, or anything that will interfere with the proper latching belt may require the use of a locking clip of the Safety Seat to the Base.

  • Page 25: Installation Of The Base Using Latch

    INSTALLATION INSTALLATION Ally 35 Approved Installations 1. Remove any toy or other objects attached to carry handle before On Base Vehicle Belt LATCH installing car seat in vehicle. 2. Locate a LATCH seating position as identified in your vehicle owner’s manual. Some LATCH seating positions may require deploying of anchors, or installation of guides.

  • Page 26: Setting Proper Recline Of The Safety Seat / Base

    INSTALLATION INSTALLATION with your knee or hand on the Base while hook release button on each Press to release pulling upward on each webbing end. connector to release the connector The webbing will automatically lock in from the anchor (Fig. 50-1b). place.
  • Page 27 INSTALLATION INSTALLATION WARNING • If the Seat Angle Indicator shows the bubble NOT centered between the lines ,the seat is NOT installed at the Failure to properly recline the Safety Seat on the vehicle proper level of recline for occupants seat increases the risk of death or serious injury.
  • Page 28 INSTALLATION INSTALLATION • If seat angle adjuster feature does not • If the Seat Angle Indicator shows level of adjust enough to provide the proper recline for occupants 22-35 lbs the level angle of recline, place a rolled towel, or line parallel with the ground, the seat is pool noodle, under the base at the foot installed at the proper angle.

  • Page 29: Final Safety Checks

    Final Checks ADD’L INFORMATION FINAL SAFETY CHECKS ADDITIONAL INFORMATION 1. If your child is already in the Safety Seat, check that the 9.1 Using the Safety Seat in an Airplane harness is properly fitted and tight as instructed in the section This Safety Seat may be used without the Base in an airplane in 6.1, Securing your Child in the Safety Seat / Carrier.

  • Page 30: Replacement Parts

    8:00 am and 4:30 pm, Pacific Standard Time, Monday described in section Adjustment of the Shoulder Straps. through Friday or visit us online at www.babytrend.com • For the 5-point harness models, place seat pad on Safety Seat, threading the Harness straps through the Pad bottom slots and...

  • Page 31: Body Insert Use

    ADD’L INFORMATION ADD’L INFORMATION Head Insert 9.5 Cold Weather Boot Cover 9.7 Body and Head Insert Use (Not included with all models) (Not included with all models) 1- Installation Slide boot cover over the Infant seat. Secure boot Straps / cover by sliding the strap through the path of the belt or by clipping the strap to the edge of the car seat directly behind the 1- Body and head insert: ONLY use preassembled seat pad clip.

  • Page 32: Head Insert Use

    ADD’L INFORMATION ADD’L INFORMATION 4- If using harness levels 2 and 3 9.8 Head Insert Use Head insert thread the shoulder straps above (Not included with all models) the body insert into levels 2 or 3. 1- Head Insert: ONLY use this insert with Straps Strap head insert to level 4 children who weigh between 4-18 lbs.

  • Page 33: Aircraft Installation

    ADD’L INFORMATION ADD’L INFORMATION 9.9 Aircraft Installation 9.10 WARRANTY DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND FOR REPLACEMENT PARTS, 1- This Restraint is Certified for use in SERVICE AND REPAIR. Aircraft on and off the base. Please The Baby Trend warranty covers workmanship defects within ®...

This manual is also suitable for:

Ally-35Cs79d22aCs79d18aCs79b51aCs79c15aCs79c81a

Table of Contents