BABYTREND HYBRID Owner's Manual
  1. Manuals
  2. Brands
  3. BABYTREND Manuals
  4. Car Seat
  5. HYBRID
  6. Owner's manual

BABYTREND HYBRID Owner's Manual

3-in-1 combination booster seat
Hide thumbs Also See for HYBRID:
Table of Contents

Advertisement

Quick Links

Combination Booster Seat
WARNING
Carefully read and understand all instructions and warnings in
this manual. Failure to properly use this Car Seat increases the
risk of SERIOUS INJURY or DEATH in a sudden stop or crash.
KEEP INSTRUCTIONS FOR FUTURE USE.
Store this manual in the pocket provided on the back of the seat.
Car Seat
1
2
3
Stage
Stage
Stage
Toddler Car Seat
High-back Booster
Backless Booster
with Built-in
Car Seat
Car Seat
Harness
OWNER'S MANUAL
Para instrucciones en Español, conéctese a
www.babytrend.com o llamar al: 1-800-328-7363.
Convenience through innovation and thoughtful design
www.babytrend.com
Store this manual in the pocket provided
on the underside of the seat cover as
illustrated above.
Baby Trend, Inc.
13048 Valley Blvd.
Fontana CA 92335
Copyright © 2022, Baby Trend, Inc.
1-800-328-7363
(8:00 a.m. ~ 4:30 p.m. PST)
www.babytrend.com
EFB49FF_40_032822.1_PS_U
WARNING
Carefully read and understand all instructions and warnings in this
manual. Failure to properly use this Car Seat increases the risk of
SERIOUS INJURY or DEATH in a sudden stop or crash.
KEEP INSTRUCTIONS FOR FUTURE USE.
Store this manual in the pocket provided on the side
of the car seat base.
Hybrid 3-in-1 Combination Booster Seat
Stage 1
Stage 2
Toddler Car Seat
High-back Booster
with Built-in
Harness
OWNER'S MANUAL
Para instrucciones en Español, conéctese a
www.babytrend.com o llamar al: 1-800-328-7363.
Stage 3
Backless Booster
Car Seat
Car Seat
FB49

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HYBRID and is the answer not in the manual?

Questions and answers

Related Manuals for BABYTREND HYBRID

Summary of Contents for BABYTREND HYBRID

  • Page 1 Store this manual in the pocket provided on the side of the car seat base. Combination Booster Seat Hybrid 3-in-1 Combination Booster Seat WARNING Carefully read and understand all instructions and warnings in this manual. Failure to properly use this Car Seat increases the risk of SERIOUS INJURY or DEATH in a sudden stop or crash.

  • Page 2: Table Of Contents

    Table of Contents Table of Contents 7.4 Installation WITHOUT Top Tether..................41 1.0 GENERAL WARNINGS AND INFORMATION............3 7.4.1 Installation - LATCH WITHOUT Top Tether..............42 2.0 WARNINGS......................5 7.4.2 Installation - Lap/Shoulder Belt WITHOUT Top Tether..........46 7.4.3 Installation - Lap Belt Only WITHOUT Top Tether............49 3.0 FEATURES AND BENEFITS..................9 7.5 Securing your Child......................51 3.1 Toddler Car Seat........................9...

  • Page 3: General Warnings And Information

    General Warnings and Information General Warnings and Information Use Top Tether as an additional attachment to secure WARNING TO PARENTS AND CAREGIVERS Car Seat whenever possible. Proper use is required! Even if using this car seat seems easy to figure out, it is very IMPORTANT TO FOLLOW THE CAR SEAT AND - Car Seat must stay tightly secured in vehicle VEHICLE OWNER’S MANUALS! b.
  • Page 4 WARNINGS WARNINGS • Toddler Use Mode: Failure to follow these instructions and Car Seat labels can result in child striking the vehicle’s interior during a sudden - Secure this car seat with the vehicle’s Child Restraint Anchor-age System (LATCH) if available or with a stop or crash.
  • Page 5 WARNINGS WARNINGS • This Car Seat is designed and tested to accommodate • The Car Seat may become very hot if left in direct sun- a child of a specific range of WEIGHT and HEIGHT. Using light. Your child may suffer burns from hot components. the Car Seat for a child whose weight or height is outside Always check the Car Seat for hot surfaces that may of these limits will increase the risk of death or serious...
  • Page 6 Features and Benefits Features and Benefits 3.1 Toddler Car Seat 3.2 Toddler Car Seat (WITH Built-in Harness System) (WITH Built-in Harness System) Head Support Head Support Head Support Adjustment Knob Six Adjustment Levels Head Support Harness Back Support Strap Slots Harness Strap Covers Harness Clip...
  • Page 7 Features and Benefits Features and Benefits 3.3 High-back Booster Car Seat 3.4 Backless Booster Car Seat (WITHOUT Harness System) (WITHOUT Harness System and Back Support) Head Support Shoulder Belt Guide Head Support Booster Shoulder Belt Shoulder Positioner Assembly Belt Guide Booster (Stored in Owner’s Shoulder...
  • Page 8 Preparing Car Seat for Use Preparing Car Seat for Use Preparing Car Seat for Use The steps to prepare the Car Seat for use with your child are Backless Booster Car Seat WITHOUT Harness System “40 - 100 outlined below and described in detail in this owner’s manual. lbs.”...
  • Page 9 Preparing Car Seat for Use Weight and Height Recommendations WARNING WARNING 4.4 Proper Use Check List Toddler Car Seat (WITH Harness) DEATH DEATH or or SERIOUS INJURY SERIOUS INJURY can occur: can occur: √ Car seat is securely installed in vehicle. FAILURE TO USE CHILD RESTRAINT IN A MANNER FAILURE TO USE CHILD RESTRAINT IN A MANNER APPROPRIATE FOR YOUR CHILD’S SIZE MAY INCREASE THE...
  • Page 10 Weight and Height Recommendations Weight and Height Recommendations 5.2 TODDLER CAR SEAT USE 5.3 HIGH-BACK BOOSTER CAR SEAT USE (WITH Built-in Harness System) (WITHOUT Built-in Harness System) Child MUST meet all of the following requirements to use the Child MUST meet all of the following requirements to use the High-back Booster Car Seat mode: Toddler Car Seat mode: •...
  • Page 11 Weight and Height Recommendations Selecting a Vehicle Seating Location WARNING WARNING 5.4 BACKLESS BOOSTER CAR SEAT USE (WITHOUT Built-in Harness System) There are many different types of vehicles, vehicle seat belt systems, or other occupant restraint systems in use Child MUST meet all of the following requirements to use the today.
  • Page 12 The Hybrid 3-in-1 Toddler Car Seat (WITH manual. Harness) can be used with the LATCH system to the maximum weight for •...
  • Page 13 Selecting a Vehicle Seating Location Toddler Car Seat (With Built-in Harness) Installation and Use Seating Locations to Avoid Proper Installation DO NOT use this Car Seat in the following seating locations. • Never use this Car Seat in a vehicle seating location that has an Active Frontal Air Bag •...
  • Page 14 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use The belt path routing used to secure this car seat Belt Routing Options for Installation: into a vehicle is dependent on the child’s WEIGHT and installation WITH...

  • Page 15: Installation Without Top Tether

    Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use Installation WITH Top Tether Installation WITHOUT Top Tether “REAR ENTRY” Belt Routing The “FRONT ENTRY” belt routing, must be used when the Top Tether is used to Tether secure this Car Seat.
  • Page 16 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 7.3.1 Installation - LATCH WITH Top Tether 3. Route the LATCH lower anchor belt Tether using the “FRONT ENTRY” belt routing as shown in Section 7.2. FRONT 4.
  • Page 17 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 9. Place your knee inside seat 13. Check for a secure installation by and pull on the free end of the LATCH grasping the car seat armrest and strap to tighten (2).
  • Page 18 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use To remove car seat: 7.3.2 Installation - Lap/Shoulder Belt WITH 1. Loosen Top Tether by pressing the button on Tether Adjuster and sliding belt through adjuster (1).
  • Page 19 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 6. If the vehicle seat back is adjustable, 12. While holding the lap belt tight, pull slack adjust into the upright position or the out of shoulder belt and allow retractor to Tether position specified in the vehicle owner’s...
  • Page 20 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use To secure car seat in vehicle: 1. Loosen Top Tether by pressing the button on the Tether Adjuster and sliding belt through adjuster (1).
  • Page 21 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 7. Pull the vehicle Lap belt out and route 13. Check for a secure installation by grasping Tether through the car seat using the “FRONT the car seat armrest and pushing side-to ENTRY”...

  • Page 22: Installation - Latch Without Top Tether

    Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 7.4.1 Installation - LATCH WITHOUT Top Tether 7.4 Installation - WITHOUT Top Tether WARNING WARNING The “REAR ENTRY” belt routing must REAR be used when a Top Tether is NOT used Only use the car seat LATCH System in vehicle seating Only use the car seat LATCH System in vehicle seating...
  • Page 23 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 9. Place your knee inside seat 3. Adjust the harness strap height for your child – Harness straps MUST be at or and pull on the free end of the LATCH above the child’s shoulders (see strap to tighten...

  • Page 24: Installation - Lap/Shoulder Belt Without Top Tether

    Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use To remove car seat: 7.4.2 Installation - Lap/Shoulder Belt WITHOUT Tether 1. Loosen LATCH lower anchor belt by putting knee in seat and while pressing down (1), lift up on LATCH Adjuster and slide belt through adjuster (2).
  • Page 25 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 4. Place the car seat on the vehicle seat in 10. While holding the lap belt tight, pull slack a seating location and centered between out of shoulder belt and allow retractor the Lap/Shoulder belt anchorages (see to tighten shoulder belt.

  • Page 26: Installation - Lap Belt Only Without Top Tether

    Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use 7.4.3 Installation - Lap Belt Only WITHOUT 4. Place the car seat on the vehicle seat in a seating location and centered between Tether the Lap belt anchorages (see “Selecting a Vehicle Seating Location”...

  • Page 27: Securing Your Child

    Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use WARNING WARNING 9. Check for a secure installation by grasping the car seat armrest and pushing side-to- side and front-to-back. The car seat should DEATH or SERIOUS INJURY can occur: DEATH or SERIOUS INJURY can occur: not move more than 1 inch in either...
  • Page 28 Toddler Car Seat (With Built-in Toddler Car Seat (With Built-in Harness) Installation and Use Harness) Installation and Use To secure your child: 4. Snugly adjust harness around your child by pulling the harness adjuster strap at front of car seat shown. 1.

  • Page 29: Booster Car Seat (Without Built-In Harness System)

    Toddler Car Seat (With Built-in Booster Car Seat (Without Built-in Harness) Installation and Use Harness) Installation and Use WARNING WARNING - DO NOT use the Car Seat if the harness assembly can become loose. Check to see if the harness adjuster area is free of dirt. Contact Baby Trend at 1-800-328-7363 for assistance.

  • Page 30: High-Back Booster Car Seat (Without Built-In Harness System)

    Booster Car Seat (Without Built-in Booster Car Seat (Without Built-in Harness) Installation and Use Harness) Installation and Use WARNING WARNING To secure car seat and your child: 1. Assemble the Back Support (see “Assembly and Removal of DEATH or SERIOUS INJURY can occur: DEATH or SERIOUS INJURY can occur: Back Support”...

  • Page 31: Installation And Use

    Booster Car Seat (Without Built-in Booster Car Seat (Without Built-in Harness) Installation and Use Harness) Installation and Use 5. If the vehicle seat back is adjustable, 9. Adjust Head Support so that the vehicle adjust into the upright position or the shoulder belt passes over the shoulder position specified in the vehicle owner’s midway between the neck and the end...

  • Page 32: Backless Booster Car Seat (Without Built-In Harness System)

    Booster Car Seat (Without Built-in Booster Car Seat (Without Built-in Harness) Installation and Use Harness) Installation and Use 8.2 Backless Booster Car Seat (WITHOUT Built-in 11. Check fit of the vehicle seat belts on child: - Vehicle lap belt must be low on hips contacting the thighs. Harness) Installation and Use - Vehicle shoulder belt must contact the chest and be WARNING...
  • Page 33 Booster Car Seat (Without Built-in Booster Car Seat (Without Built-in Harness) Installation and Use Harness) Installation and Use 7. Pull the vehicle lap/shoulder belt across 2. Tuck harness adjustment belt up under front front of child and buckle vehicle seat belt. of the seat base.

  • Page 34: Vehicle Seat Belts

    Booster Car Seat (Without Built-in Vehicle Seat Belts Harness) Installation and Use 9.1 Check that the Vehicle Seat Belt is Safe to Use . Check fit of the vehicle seat belts on child: - Vehicle lap belt must be low on hips Toddler Car Seat use (WITH Build-in Harness)
  • Page 35 Vehicle Seat Belts Vehicle Seat Belts Safe Seat Belt Systems: Combination Lap/Shoulder Belt with sliding LATCH plate (continued) The following vehicle seat belt systems can be used with the Car Seat provided that all of the other requirements prescribed in Please refer to your vehicle owner’s manual for these instructions, including seat position, and all instructions additional information on locking this style of seat belt.
  • Page 36 Vehicle Seat Belts Vehicle Seat Belts Unsafe Seat Belt Systems: Combination Lap/Shoulder Belt With Retractor: DO NOT use the following types of vehicle seat belt systems with DO NOT use a vehicle lap/shoulder the Car Seat. These vehicle seat belt systems will not hold the belt system if the lap belt and shoulder Car Seat securely in place at all times.
  • Page 37 Vehicle Seat Belts Vehicle Seat Belts Lap Belts Located Forward of Seat Crease: If you have any of the above vehicle seat belt systems, DO NOT use it to secure the Car Seat in the vehicle. DO NOT use a vehicle seat belt that is Look in the vehicle for a location that anchored on the vehicle seat more than has a more suitable vehicle seat belt...

  • Page 38: Operation And Adjustments

    Operation and Adjustments Operation and Adjustments 10.0 10.0 10.1 Assembly and Removal of Back Support • Lay the Back Support flat behind the seat base but maintain them Before using your Car Seat in your vehicle, you must assemble side by side (4). NOTE: the Back Support and prepare the Car Seat harness straps for May require folding the your child.
  • Page 39 Operation and Adjustments Operation and Adjustments 10.0 10.0 To assemble Back Support • Check ensure no parts of the harness Method 2: straps or seat pad are not trapped between the Back Support and the seat base (4). • Place Car Seat on the floor or other firm surface and loosen the harness and lat the Back Support flat behind the seat base (see “Adjustment of the...

  • Page 40: Changing Harness Strap Adjustment

    Operation and Adjustments Operation and Adjustments 10.0 10.0 10.2 Changing Harness Strap Adjustment 3. Check that the Harness Straps are snugly adjusted. The harness strap is properly WARNING WARNING tightened if you are not able to insert more than one finger between the harness strap To prevent injury from contact with the vehicle To prevent injury from contact with the vehicle and the child’s shoulder or thigh.

  • Page 41: Changing Harness Strap Height

    Operation and Adjustments Operation and Adjustments 10.0 10.0 Note: Discontinue use of Body Insert when child’s shoulders 10.3 Changing Harness Strap Height are above Harness Strap Slots in second row up from the bot- tom on the back support. WARNING WARNING To Remove Harness Straps from Back Support: DEATH or SERIOUS INJURY can occur:...

  • Page 42: To Re-Attach Harness Straps / Adjust Height Positions

    Operation and Adjustments Operation and Adjustments 10.0 10.0 To Re-attach Harness Straps / Adjust height positions: c. Feed one Harness Strap Connector plate through each Harness Strap End (1). Ensure both Straps are securely connected to the connector plate (2). Re-attach the Harness Straps at the required height by placing the Harness Straps into the matching harness straps slots in the Back Support Pad and Back Support,...

  • Page 43: Threading And Removing Harness Straps And Crotch Buckle

    Operation and Adjustments Operation and Adjustments 10.0 10.0 Threading and Removing Harness Straps and d. Pull out the buckle Crotch Buckle e. Leaving buckle tongue in buckle on childs a. From the rear, remove the right side, pull webbing harness straps from the from child left side to Connector plate.

  • Page 44: Changing Buckle Position

    10.4 Changing Buckle Position b. From bottom of car seat, pull the metal The Hybrid 3-in-1 is equipped with a 2 - position crotch buckle. retainer through and position it properly. Position - 1 is the installed position from the factory and is c.

  • Page 45: Adjusting The Head Support / Knob

    Operation and Adjustments Operation and Adjustments 10.0 10.0 10.5 Adjusting the Head Support 10.6 Assembly and Removal of Vehicle Shoulder Belt Positioner The Head Support on this Car Seat is designed to provide maximum lateral head protection. Never Use the Shoulder Belt Guide to center the remove the Head Support from the Back Support.
  • Page 46 Operation and Adjustments Additional Information 10.0 11.0 11.1 Certifications Use and Adjustment of Vehicle Shoulder Belt Positioner This Car Seat conforms to all Federal Motor Vehicle Safety Standards for use in motor vehicles and aircraft. See use - Insert the vehicle shoulder belt into modes below: both sides of the Shoulder Belt Guide.

  • Page 47: Cleaning And Maintenance

    Cleaning and Maintenance Cleaning and Maintenance 12.0 12.0 WARNING WARNING 12.0 Cleaning and Maintenance The hard surfaces of the Car Seat (plastic components and metal parts) except the Buckle, may be cleaned by wiping with a DO NOT DO NOT use Car Seat without seat, back support and use Car Seat without seat, back support and solution of water with mild soap.

  • Page 48: Warranty And Replacement Parts

    328-7363 Monday through Friday between 8:00 a.m. and 4:30 Reverse above steps for replacing pads and harness system. p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/ Cleaning Harness System: pages/limited-warranty for complete warranty details.

  • Page 49: How To Register Your Car Seat

    (date) can be found on a label on the bottom the child restraint. USA Toll Free: 1-800-328-7363 8:00 a.m. to 4:30 p.m. (PST) of the child restraint. Monday - Friday or www.babytrend.com Model Number : _________________ Manufactured (date) : _________________ Purchase Date : _________________ Please fill out the prepaid registration post card attached to the safety harness and mail it today.
  • Page 50 NOTES...

This manual is also suitable for:

Fb49e14aFb49e15a

Table of Contents

Save PDF