BABYTREND ALLY-35 Owner's Manual
  1. Manuals
  2. Brands
  3. BABYTREND Manuals
  4. Car Seat
  5. ALLY-35
  6. Owner's manual

BABYTREND ALLY-35 Owner's Manual

Infant car seat, child weight: 1.8 to 15.8 kg (4 to 35 lbs) child height: 81.3 cm or less (32”)
Hide thumbs Also See for ALLY-35:
Table of Contents

Advertisement

Quick Links

STOP
If you experience any difficulty in using this product, please
contact our customer service department at 1-800-328-
7363 between the hours of 8:00am and 4:30pm Pacific
Standard Time for assistance. Please have your model
number and manufacturing date available when you call.
This information can be found on a small sticker on the
bottom of the product.
Carefully read and understand all instructions and
warnings in this manual. Failure to properly use
this Infant Car Seat incre
INJURY or DEATH in a sudden stop or crash.
KEEP INSTRUCTIONS FOR FUTURE USE.
Store this manual in the pocket provided on
Child Weight:
Copyright © 2017, Baby Trend, Inc.
www.babytrend.com
Baby Trend, Inc.
1607 S. Campus Ave.
Ontario, CA 91761
Store this manual in
WARNING
the pocket provided
ases the risk
of SERIOUS
the side of the seat.
underneath the
Car Seat Cover.
ALLIE-35
®
INFANT CAR SEAT
4 to 35 lbs (1.82 to 15.8 kg)
Child Height:
32" or less (81.3 cm)
OWNER'S MANUAL
www.babytrend.com
ALLIE_35_101917U
1-800-328-7363
(8:00am ~ 4:30pm PST)
www.babytrend.com
WARNING
Carefully read and understand all instructions and
warnings in this manual. Failure to properly use
this Infant Car Seat increases the risk of SERIOUS
INJURY or DEATH in a sudden stop or crash.
KEEP INSTRUCTIONS FOR FUTURE USE.
Store this manual in the pocket provided on
the side of the seat.
ALLY - 35
INFANT CAR SEAT
1.8 to 15.8 kg (4 to 35 lbs)
Child Weight:
Child Height:
OWNER'S MANUAL
www.babytrend.com
Copyright © 2019, Baby Trend, Inc.
™
81.3 cm or less (32")
ALLY_35_031219_CAN_E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ALLY-35 and is the answer not in the manual?

Questions and answers

Related Manuals for BABYTREND ALLY-35

Summary of Contents for BABYTREND ALLY-35

  • Page 1 INFANT CAR SEAT Child Weight: 4 to 35 lbs (1.82 to 15.8 kg) Child Height: 32” or less (81.3 cm) OWNER’S MANUAL www.babytrend.com Copyright © 2017, Baby Trend, Inc. ALLIE_35_101917U ALLY - 35 ™ INFANT CAR SEAT 1.8 to 15.8 kg (4 to 35 lbs)

  • Page 2: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS WARNINGS TO ALERT YOU TO POSSIBLE DANGERS ..........3 SECURING THE SAFETY SEAT OR BASE IN THE VEHICLE ........39 7.1 Preparation ...................... 40 HOW TO REGISTER YOUR SAFETY SEAT ..............4 7.2 Installation of the Safety Seat / Vehicle Belt Installation of Base ....41 SAFETY INFORMATION ....................

  • Page 3: Warnings To Alert You To Possible Dangers

    Campus Avenue, Ontario, CA 91761 or call 1-800-328-7363 or 5. Proper use and routing of the seat belts in your vehicle is register online at http://www.babytrend.com/registration.html. For essential for proper installation. Not all vehicle seat belts will recall information, call Transport Canada at 1-800-333-0371 adequately secure the Safety Seat.

  • Page 4: Safety Information

    Safety Safety SAFETY INFORMATION 3.2 About your vehicle • Proper installation of the Safety Seat in your vehicle and proper 3.1 About your child securing of your child in the Safety Seat are essential to ensure the safety of your child. Quick turns, sudden stops, or other •...

  • Page 5: About Active Air Bags

    Safety Safety 3.3 About Active Air Bags 3.5 About this Safety Seat NEVER PLACE THIS SAFETY SEAT IN A VEHICLE SEATING • This Safety Seat is constructed of plastic that can deform over LOCATION THAT HAS AN ACTIVE AIR BAG. If an Active time if left with any object in the seat while stored.

  • Page 6: About Use As A Carrier

    Safety Safety 3.6 About use as a carrier • Before lifting the carrier with the handle, check that the handle is firmly locked into position. The carrier will pivot about an Never Leave Your Child Unattended, even if they are asleep. unlocked handle and can result in injury to your child.

  • Page 7: Selecting The Best Location For The Safety Seat

    Location Location SELECTING THE BEST LOCATION FOR • If the driver is the only adult in the vehicle and the child requires constant monitoring, then the forward seating position THE SAFETY SEAT may be used if there is no passenger side Active Air bag and all of the following requirements are met for this location.

  • Page 8: Check That The Vehicle Seat Belt Is Safe To Use

    Location Location • DO NOT place this Safety Seat in any vehicle seat belts systems that are not safe for use with the Safety seat that faces to the rear or to either side of Seat. These systems may look safe but their method of the vehicle (Fig.
  • Page 9 Location Location • DO NOT use a lap belt that stays loose after • DO NOT use a seat belt that is anchored on installed and locks only in a crash or sudden the seat more than 2 inches forward of the stop.
  • Page 10 Location Location This combination seat belt does not require a Seat belt systems that are Adequate for use with the Safety locking clip (Fig. 18-1). Seat: The following seat belt systems can be used with the Safety Seat • A lap/shoulder combination belt system provided, that all of the other requirements prescribed in these Fig.

  • Page 11: Safety Seat Features And Their Proper Use

    Features Features SAFETY SEAT FEATURES AND THEIR 5.2 Rear view of Model PROPER USE Harness Slots Locking Clip Carry Handle Canopy 5.1 5-Point Harness Owner’s Base/Stroller Moving Seat Manual Hook Back (Adjustable Holder Back Model) Seat Angle Canopy Indicator Harness Belt Seat Pad Handle...

  • Page 12: Base

    Features Features Your Safety Seat base can be installed with either the vehicle belt 5.3 Base or with the included UAS Hooks attachment system. Attachment Locks Storage UAS Connector storage in side Belt Path for of base Connector Vehicle Belt Storage Installation Foot...

  • Page 13: Use Of The Safety Seat With The Base

    Features Features • To remove the car seat from 5.4 Use of the Safety Seat with the Base the base and stroller, squeeze the Base Release handle, • To attach the Safety Seat to the Base, Rebound located below the head end of align the Safety seat with the Base Position the Safety Seat, to release the...

  • Page 14: Other Features

    Ensure the angle at http://www.babytrend.com/registration.html - Do not place this restraint in a vehicle seat that has an active frontal air bag. If an active frontal air bag inflates it can hit the car...

  • Page 15: Operation Of The Carry Handle

    Features Features 5.6 Operation of the Carry Handle • Slowly rotate the handle to the desired position. The buttons WARNING should pop out and the handle should automatically lock into the new position (Fig. 28-1). Toys or other objects attached to carry handle can cause injury in a crash.
  • Page 16 Features Features 5.8 Adjustment of the Shoulder Straps 4. Loosen the harness straps by depressing the Harness Adjuster Button located below the flap just ahead of The Safety Seat features three height the Harness Buckle and pulling on the adjustments for the harness shoulder harness straps.
  • Page 17 Features Features 1/2 to 1 inch above thigh You have three adjustment positions on the 5.9 Low Birth Weight Adjustment harness. Use Position A for a smaller child, and Position B or C for a larger child. The Crotch Shortening clip is only to If using Position A, loop B and C must be be used with children whose weight is on top of the Belt Adjuster Plate (Fig.
  • Page 18 Features Features 1d. To thread the stamping back into 5. To shorten the buckle webbing length, thread Seat Cut-Away the strap slip the strap through the the anchor bracket through the slot forward of center by reversing steps 1b and 1c. the use position.
  • Page 19 INFANT RESTRAINT INFANT RESTRAINT 6.1 Securing your Child in the Safety Seat / Carrier In a crash, the safety seat provides no protection for your child unless the Harness Straps are properly USING INFANT RESTRAINT installed according to these instructions. Make sure that the harness straps are properly adjusted and Your child must meet ALL these requirements: secured whenever using the Safety Seat, even when...
  • Page 20 INFANT RESTRAINT INFANT RESTRAINT 6.2 For the 5-Point Harness 3. Place the Safety Seat on a firm and level surface. Move the carry handle • Type A: Put the two buckle tongues to the non rocking position. Loosen together, overlaying the left buckle tongue the Harness Straps by pulling on the onto the right buckle tongue, and insert straps while pushing on the Harness...

  • Page 21: Securing The Safety Seat Or Base In The Vehicle

    Securing Car Seat in Your Vehicle Securing Car Seat in Your Vehicle WARNING: 7.1 Preparation Toys or other objects 1. Park your vehicle on a level surface so that attached to carry handle can cause injury in a crash. Never the level indicator located on the left side of attach toys or other objects to handle when in vehicle.

  • Page 22: Installation Of The Safety Seat / Vehicle Belt Installation Of Base

    - Follow all instructions on this child restraint and in the written instructions located on the side of this child restraint. - Register your child restraint with the manufacture. Register online at http://www.babytrend.com/registration.html slide the vehicle lap belt into the Vehicle Belt 4. Remove any toys or other objects - Do not place this restraint in a vehicle seat that has an active frontal air bag.

  • Page 23: To Remove Base

    - Follow all instructions on this child restraint and in the written instructions located on the side of this child restraint. - Register your child restraint with the manufacture. Register online at http://www.babytrend.com/registration.html 5. Check that car seat is in the correct does not remain tightly installed in the vehicle seat! - Do not place this restraint in a vehicle seat that has an active frontal air bag.

  • Page 24: Removing Car Seat From Base

    Securing Car Seat in Your Vehicle Securing Car Seat in Your Vehicle 7.9.0 Car Seat Only Installation without Base 6. Check that toys are removed from carry handle, and then adjust handle WARNING into the REBOUND position. When this car seat is used with a base, the carry handle must be in the - VEHICLE SEAT BELT MUST BE PROPERLY ROUTED AND REBOUND position (Fig.

  • Page 25: Securing Car Seat With Vehicle

    - Register your child restraint with the manufacture. Register online at http://www.babytrend.com/registration.html - Do not place this restraint in a vehicle seat that has an active frontal air bag. If an active frontal air bag inflates it can hit the car seat with great force and cause death or serious injury to your child.
  • Page 26 - Register your child restraint with the manufacture. Register online at http://www.babytrend.com/registration.html - Do not place this restraint in a vehicle seat that has an active this section. If vehicle belt does not stay frontal air bag.

  • Page 27: To Remove Car Seat

    INSTALLATION INSTALLATION Ally 35 Approved Installations 3. Rotate handle to the carry position On Base Vehicle Belt (Fig 51.1). 4. Remove Car Seat, (Fig. 51-1). Lap/Shoulder Belt Lap belt only UAS Lower Anchor Off Base Vehicle Belt Fig. 51-1 Lap/Shoulder Belt Lap Belt only 7.9.6 Installation of the Base using UAS Lower Anchors and Tethers for Children (UAS) System is...
  • Page 28 INSTALLATION INSTALLATION 1. Remove any toy or other objects 5. Locate the UAS anchors in the attached to carry handle before vehicle seat (Fig. 54-2). Once installing car seat in vehicle. located, snap the Safety Seat UAS connectors onto the steel rod. Listen 2.

  • Page 29: Setting Proper Recline Of The Safety Seat / Base

    (Fig. 56-3). - Register your child restraint with the manufacture. Register online at http://www.babytrend.com/registration.html - Do not place this restraint in a vehicle seat that has an active frontal air bag. If an active frontal air bag inflates it can hit the car seat with great force and cause death or serious injury to your child.
  • Page 30 INSTALLATION INSTALLATION WARNING • If the Seat Angle Indicator shows the bubble NOT centered between the lines ,the seat is NOT installed at the Failure to properly recline the Safety Seat on the vehicle proper level of recline for occupants seat increases the risk of death or serious injury.
  • Page 31 INSTALLATION INSTALLATION • If seat angle adjuster feature does not occupants greater than 10 to Seat Angle Center bubble for Indicator adjust enough to provide the proper 15.8 kg (22 to 35 lbs). children 1.8-10kg (4-22 lbs). Bulle du centre pour les angle of recline, place a rolled towel, or •...

  • Page 32: Final Safety Checks

    Final Checks ADD’L INFORMATION FINAL SAFETY CHECKS ADDITIONAL INFORMATION 1. If your child is already in the Safety Seat, check that the 9.1 Using the Safety Seat in an Airplane harness is properly fitted and tight as instructed in the section This Safety Seat may be used without the Base in an airplane in 6.1, Securing your Child in the Safety Seat / Carrier.

  • Page 33: Adjustment Of The Shoulder Straps

    Pacific Standard Time, Monday through Friday or visit us • For the 5-point harness models, place seat pad on Safety Seat, online at www.babytrend.com threading the Harness straps through the Pad bottom slots and pulling the Buckle through the opening at the rear of the flap on...

  • Page 34: Body Support Use

    ADD’L INFORMATION ADD’L INFORMATION 9.5 Cold Weather Boot / Cover 9.7 Aircraft Installation 1- (Not included with all models) Slide boot / cover over the front on the Infant seat. Secure boot / cover by sliding the strap 1- This Restraint is Certified for through the path of the belt or by clipping the strap to the edge use in Aircraft on and off the of the car seat directly behind the preassembled seat pad clip.

Table of Contents