Product Features - Maytag Pet Pro Technical Manual

Control Panel
*Appearance may vary depending on model
POWER
Press to turn on/off or to stop/cancel a cycle.
CYCLE KNOB
Turn knob to select desired cycle.
START/PAUSE
Press and hold the Start/Pause button for 1 second until all status lights are
illuminated, then release to start cycle. Press during a cycle to pause cycle
and unlock lid.
NOTE: If machine is spinning it may take longer to unlock lid.
CYCLE MODIFIERS (Not all modifiers are available on
all cycles)
Temp
Press to modify the cycle's available temperatures (Tap-Cold, Cold, Cool,
Warm, or Hot).
NOTE: Pressing Temp will toggle through available temperature options.
When no lights in the temperature column are illuminated the selected
temperature is Tap Cold.
OPTIONS
Press to add or remove options for each cycle. Press once to add an Extra
Rinse, twice to activate Deep Water and three times for both.
EXTRA RINSE EXTRA RINSE
Select this option to add a second rinse.
DEEP WATER DEEP WATER
Use this option to automatically add more water to your wash cycle.
You can also use this option to reduce the likelihood of white residue on
dark clothing.
FOR SERVICE TECHNICIAN'S USE ONLY

Product Features

A. Power
B. Cycle Knob
B B
C. Start/Pause
D. Cycle Modifiers
PET PRO (Fabric Softener)
See notes below for how to turn these modifiers on/off.
PET PRO
Select this option to boost pet hair filtering performance. You can use this
mode anytime but it's especially suited for loads with high amounts of pet
hair. Turn this modifier on/off with a single button press. For some load sizes
"Pet Pro" must be selected in order to collect hair.
NOTE: Pet Pro modifier is intended for removing pet hair from clothes. Do
not put pets into the Washer.
FABRIC SOFTENER
Select this option to let the machine know when you have added liquid fabric
softener. Turn this modifier on/off by holding the button until the fabric
softener light turns on/off.
A
C
D
9