Lens Hoods - Mamiya C330 Accessories Manual

Filters
There are five different types of
filters (Y2, YG, 02, UV, and SL) for
e a c h filter srze described
system chart on page 41.
T h e r e a r e t w o different
l
t e r s f o r t h e 8 0 m m f / 2 . 8 a n d
105mm f/3.5 lenses. When
o r d e r filters f o r t h e s e l e n s e s ,
always specify the diameter
your lens.
W h e n using a 4 9 m m diameter
l
filter, e m p l o y t h e 4 9 m m filter
for Mamrya C; otherwise attach-
ing the lens hood might be im-
possible. When you order filters,
always specify the MAMIYA C
Professional type.
To attach a f i l t e r to a lens of
l
49mm filter diameter, place your
palm on the protective
screwed into the front barrel of
the lens, turn the ring counter-
clockwise to remove it, and then
screw in the filter. When a filter
is not used, always replace the
ring to protect the lens barrel.

Lens hoods

There are five different types of
lens hoods available for interchange-
in the able lenses.
Lens hood for 55mm lens ( * )
diame-
Lens hood for 65mm lens ( * )
L e n s h o o d 4 2 m m
you
f/2.8 (chrome
f/3.5 (chrome type) lenses
of L e n s h o o d 4 8 m m
f / 2 . 8 ( b l a c k t y p e ) 1 0 5 m m f / 3 . 5
D and 135mm f/4.5 lenses
L e n s h o o d f o r s u p e r
180mm and 250mm lenses ( * )
L e n s
a s t e r i s k ( * ) h a v e a s i d e p l a t e
which
the lens hood to the lens with
this plate
reflected from the lens hood to
lens ring the viewing lens becomes annoy-
i n g w h i l e focusing,
certain
the side
annoying
All of these lens hoods are com-
p a r a t i v e l y n e w t y p e a t t a c h e d
only to the taking lens. Old type
lens hoods are also acceptable.
type) and 105mm
180mm,
h o o d s m a r k e d w i t h a n
can be inclined. Attach
upward. When light
d u e t o a
light condition, incline
plate to eliminate the
reflection.
Lens cases
Seven types of hard leather cases
are available for protecting the fol-
lowing interchangeable
55mm, 65mm, 80mm, 105mm,
135mm, 180mm, and 250mm.
Soft leather case
The soft leather case is widely
applicable to protect interchange-
a b l e l e n s e s f o r t h e M a m r y a
Professional or to store accessories.
This case also can hold lenses
for the Mamiya Press and
RB.
lenses :
C
Mamiya
24