Advertisement
Available languages
Available languages
Specification - PLCCLC:
1, voltages: AC 230v
2, frequency: 50/60HZ
3, Power: 280W
4, Lighting: OSRAM ELC 24V/250W LAMP PLLP25024D3
5, Lighting Resistance: 1.5KV
6,Insulting Resistance: >2M
7,Channel: 4 channels
8, Signals: international standard DMX 512
9, Control method: Single mode/ Synchronic mode/ Controller mode
10, Colors: 13 colors /white/shutter
11,Gobos: 15
12, Memo: Focus adjustable
Accessories:
1, XLR control cable
2, power cable
3, this manual
Attention
1, Indoors only;
2, One must be familiar with lighting function before fix, perform and repair. Many damages are caused by mal-perform .
3,Please carefully check if there is any damage caused in transportation as soon as unfold packing.
4, Before changing lamp, ensure power had been cut and off and lighting had fully cooled.
5, Open repairing cover, fit the lamp, do not touch lamp directly
6, Do not use light with cover open
7, Lighting must be fix in place breezy, examine fans cover after fix
8. Power the light, it will self-examine automatically, do not do and perform before self-examined over.
9. Do not shake light
Single mode.
Light has 10 dip switches
Disconnect controller; switch all IP code OFF, lighting is running in single mode.
in single mode, lighting controlled by internal MIC televox
Synchronic mode
You can connect several lights without controller in synchronic mode
Turn one light the 10 th IP ON, other IPs turned OFF, this light is a master machine.
Turn other lights the 1 st IP ON. Other IPs turned OFF, these lights are slave machines.
Connect Master Machine's DMX output to 1 st Slave machine's input with XLR-XLR cable. Then Connect 1 st slave machine output to 2 nd slave machine's input,
as so on, connect all lights in serials. Finally, connect circle plug (enclosed with machine) to output of last slave machine. Complete the connection. All lights
running in synchronic mode.
In synchronic mode, all lights controlled by internal MIC televox of master machine.
Only one master machine otherwise may caused unforeseen damage on internal circuit.
Controller mode.
Lighting controlled by internal standard DMX 512 signal pastoral, you can change 1 st to 9 th IP code setting by controller and controller several lightings
Connect DMX controller's output to the 1 st lighting's DMX input; connect 1 st lighting's output to 2 nd lighting's DMX input. And so on. Connect all lightings
in serials. Finally, connect circle plug (enclosed with machine) to output of last lighting's output. Connection completed.
Perform program
Turn lighting the 9 th and 10 th ON, other IP code turn OFF, lighting will run in its internal program mode.
H. Channel
Lighting has 3 channels, controlled by international standard DMX512 signal.
Channel 1: colors
Channel 2: gobos
Channel 3: rotary
Channel 4: dimmer
IP CODE SETTING
Lighting have 10 IP switches, 1-9 are IP CODE,
CODE 1=1
CODE 2= 2;
CODE 3= 4
CODE 4= 8
CODE 5=16
CODE 6=32
CODE 7=64
CODE 8=128
CODE 9=256
For example: turn the 1 st code ON, the 4 th ON, the 5 th ON, get lighting's IP code: 1+8+16=25
Maintains;
1,Keep Lightings in dry place and do not working in moisture environment.
2, Do not made light running for a long time in risk of hot damage.
3, Made the fans grille cleaning.
4, Made the lens cleaning to get better effect.
5.Do not clear lighting shell by alcohol and other organic solvent.
Weight: 6 kg
Size: 36x33x27
Fuse: 3.15A
Lamp: PLLP25024D3
3
Advertisement
