Q-tran QOM-eLED+DALI-DT8 Manual page 4

QOM-eLED+DALI-DT8
Wiring Diagram
12-36VDC IN
VDC and LED connectors:
AWG 24-16
1
0.2-1.5 mm
2
- +
2
0.35 inch
D1+ D1+
D1- D1-
D2+ D2+
D2- D2-
To DALI Controller
DALI Signal DALI Signal
in/out in/out
DALI Bus
Power Supply
*By Others
DALI
Controller
*By Others
12V - 36V DC IN
•
To connect the driver to a DC power supply unit (PSU), connect the PSU's positive voltage supply wire to the VDC+ connector and the
PSU's negative voltage supply wire to the VDC- connector.
DALI Signal in/out
•
Use these connectors when the driver is used in a DALI network. For DALI in, connect the network cable's DALI+, to the D1+, and D1-
connectors respectively. For DALI out, connect the network cable's DALI - to the D2+, and D2- connectors respectively.
•
Separate DALI Bus power supply required. By others.
LED groups
•
Indicates the location of the connectors for your LED groups. R(ed) represents channel 1, G(reen) represents channel 2, B(lue)
represents channel 3 and W(hite) represents channel 4. The default group color allocation can be changed over
the 2-button user interface.
© 2022 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com
Other connectors:
AWG 20-16
0.5-1.5 mm
2
0.35 inch
12-36VDC IN
V-
V-
V+
V+
DALI Signal
in/out
+
R-
G-
B-
W-
DALI DALI
DALI Signal
IN OUT
in/out
DALI
Controller
*By Others
Warm
Cool
+24V
LED POWER SUPPLY 100W–300W
3-Wire 4-Wire
LED groups 12-36VDC IN
DALI Signal
in/out
DALI DALI
+24V W C
+24 R
IN OUT
DALI Bus
DALI DALI Bus
Power Supply
Controller Power Supply
*By Others
*By Others *By Others
Green
Red
*By others.
Blue
+24V
COMPLIANT
5-Wire
12-36VDC IN LED groups
LED groups
DALI Signal
in/out
DALI DALI
+24 R G
G B
IN OUT
DALI DALI Bus
Controller Power Supply
*By Others *By Others
+24V
White
Green
Red
Blue
NOTE:
For customization or pre-programming
contact a local sales rep.
DALI commissioning to be performed by a
third party at time of installation.
Specification subject to change. Rev-11-15-22
B W