Table of Contents
Advertisement
.
4.4
ELECTRICAL SYSTEM
Never work on a live electric circuit.
Never modify the boat's electrical circuit or
the relevant diagrams: all installations, modifications
cleaning and maintenance must be carried out by a
technician qualified in marine electricity.
Never modify the specifications of appliances
protecting against overloads.
Never install or replace electrical equipment or
appliances with new components exceeding the
permissible circuit amperage.
Do not leave the boat unattended when the electrical
system is powered up, excepting the automatic bilge
pump and the fire and burglar protection systems.
.
4.4.1
CAUTION
any conductive objects next to the batteries (metallic
tools, etc.).
could be an explosion risk.
Do not leave the boat unattended when the electrical
system is powered up, excepting the automatic bilge
pump and the fire and burglar protection systems.
Never install or replace electrical equipment or
appliances by new components that exceed the
circuit's amperage.
Never modify an installation. Ask a technician skilled
in marine electricity to do so.
When charging, connecting or disconnecting the
batteries, switch off the battery cut-outs.
Batteries have to be handled with care. In the event of
electrolyte projection, abundantly rinse the part of the
body which has been affected and consult a doctor.
Please note that the 12 V circuit wires are red for live and
black for negative.
Electrical panel and circuit 12 V
In order to avoid short-circuiting between
the two poles of the battery, do not store
Do not block the battery ventilation vents:
some of them release hydrogen, which
The batteries must be carefully secured.
Before replacing a fuse, switch off the
battery cut-outs.
EQUIPMENT
DANGER
WARNING
CAUTION
CAUTION
33
33
Advertisement
Table of Contents
