Table of Contents
Advertisement
Available languages
Available languages
OPERATION ________________________
Rechargeable
battery operation
When operating the appliance with
the built-in nickel metal hydride bat-
tery, only use the power adapter sup-
plied for charging.
The power adapter has an automatic
100 - 240 V ~ , 50-60 Hz transformer
which works anywhere in the world.
This allows it to adjust to all interna-
tional AC voltages.
1
Push the On/Off switch
switch off the appliance.
2
Plug the power adapter
power adapter socket
power adapter plug into the wall
socket.
– During the charging process,
the LED charging indicator
flashes.
– The LED charging indicator
is flashing blue while charging
and lights up blue after fully
charged.
3
Pull the power adapter
the power adapter socket
the power adapter plug out of the
wall socket.
Notes
Before first use or if you have not
■
used them for a long time, charge
up the batteries completely (about
14 hours).
After each further use, charging
■
time is approx. 2 hours.
The ambient temperature should
■
be between 15°C and 35°C.
If you switch on the appliance
■
to
C
while it is charging, charging will
be interrupted.
into the
K
When fully charged, the appliance
■
and the
E
works for around 50 minutes. It is
not advisable to charge the bat-
teries after each use. Generally,
you should only charge the bat-
D
teries when they are completely
discharged. This increases their
D
service life.
You can use the appliance with
■
the adapter connected to the wall
socket or in battery mode.
out of
K
Shaving
and
E
1
Remove the plastic protective cap
Caution
The foils and blade blocks must
■
be intact. Replace any damaged
.
I
ENGLISH
9
Advertisement
Table of Contents
