Power Supply; Operation With Rechargeable Batteries - Grundig MT 6830 User Manual

POWER SUPPLY

Operation with
rechargeable batteries
When operating the appliance with
the built-in nickel metal hydride
battery, only use the power unit
supplied for charging.
Plug the power cord into the
1
appliance socket
power supply unit into the wall
socket.
Notes
Charge up the batteries completely
7
before you use them for the first
time or if you have not used them
for a long time.
– The charging display
up red when charging and
changes to green when it is
fully charged.
When switched off, the charging
7
time is about 8-10 hours. If you
switch on the appliance while it is
charging, charging will stop.
– The charging display
disappears.
___________________________________
and the
D
lights
C
C
The ambient temperature should
7
be between 5 °C and 40 °C.
When fully charged, the appliance
7
works for around 40 minutes.
It is not advisable to charge the
batteries after every use, especially
if you do not use the appliance for
the full 40 minutes. Only charge
the batteries when they are
completely discharged. This
increases their service life. Do not
charge it every day.
Using the charging unit
D
Put socket
1
into the charging unit.
Plug the power cord into the
2
socket on the charging unit.
Plug the power supply unit into
3
the wall socket.
of the appliance
ENGLISH 19