Rechargeable Battery Operation - Grundig MT 6742 Manual

Hide thumbs Also See for MT 6742:
Table of Contents

Advertisement

POWER SUPPLY __________________________
Rechargeable battery
operation
When operating the appliance with
the built-in nickel metal hydride bat-
tery, only use the power unit sup-
plied for charging.
Check that the voltage indicated on
the type plate of the power supply
unit corresponds to your local
power supply.
Plug the power cord into the
1
appliance socket
power supply unit into the wall
socket.
and the
E
Notes
Charge up the batteries complete-
7
ly before you use them for the
first time or if you have not used
them for a long time (approx.
24 hours timer-controlled charg-
ing).
– The charging display
up red when charging and
changes to green when it is
fully charged.
After the batteries are first char-
7
ged, the charging time is approx.
12 hours when the appliance is
switched off. If you switch on the
appliance while it is charging,
charging will stop.
– The charging display
out.
The ambient temperature should
7
be between 5 °C and 40 °C.
When fully charged, the applian-
7
ce works for about 40 to 60 min-
utes.
This depends on the attachment
being used. It is not advisable to
charge the batteries after every
use, especially if you do not use
the appliance for the full 30 min-
utes.
Charge the batteries at your con-
venience only when they are
completely discharged.
This increases their service life.
Avoid charging every day.
lights
D
goes
D
ENGLISH 21

Advertisement

Table of Contents
loading

Table of Contents