Advertisement
TroubLeShooTing
lf your desk is not functioning properly it may need to be reset. Unplug the power cord for 20
seconds. Plug the power cord back in and follow the RESET procedure outlined in Step 8.
lf your desk has a handset with an LED readout and it displays 'RST' (reset), perform the reset
procedure outlined in Step 8.
If the LED readout displays an error message ("Er1" - "Er13") confirm that all wired connections
are secure (legs to cables, cables to control box). Then perform the reset procedure outlined in
Step 8.
If the error message persists after the reset procedure contact us at 1-800-676-6123 or by email
at sales@progressiveautomations.com.
If the height between the legs exceeds 1.5 inches, stop the reset procedure & contact us.
lf the handset displays 'HOT', let the base cool down for 20 minutes.
TeChniCaL SpeCiFiCaTionS
Height Range
23.5' - 49" (without desktop)
Base Width
depends on worksurface placement
Travel Speed
1.5" per second (no load)
Weight Capacity
704 lbs.
Duty Cycle
10% Max. 2 mins on, 18 mins off
Features
Soft start/stop
Adjustable leveling studs
4 Memory presets
how To order
1.800.676.6123
|
sales@progressiveautomations.com
|
www.progressiveautomations.com
Page 5 of 5
Advertisement
