Adjusting The Height And The Viewing Angle : Prolite Xb2483Hsu / Prolite B2483Hs; Panel Rotation : Prolite Xb2483Hsu / Prolite B2483Hs - Iiyama ProLite XB2483HSU User Manual

ADJUSTING THE HEIGHT AND THE VIEWING ANGLE :
ProLite XB2483HSU / ProLite B2483HS
 For optimal viewing it is recommended to
position yourself directly opposite to the full face
of the monitor, then adjust the monitor's height
and angle to your own preference.
 Hold the panel so that the monitor does not topple
when you change the monitor's height or angle.
 You are able to adjust the monitor's height up to
130mm, angle up to 45 degrees right and left, 22
degrees upward and 5 degrees downward.
 Do not touch the LCD screen when you
NOTE
change the height or the angle. It
may cause damage or break the LCD
screen.
 Careful attention is required not to
catch your fingers or hands when you
change the height or the angle.
 Injury can occur if care is not taken to
avoid fi nger contact with the displays
base when adjusting the height.

PANEL ROTATION : ProLite XB2483HSU / ProLite B2483HS

A Adjust the mother's height.
B Rotate the panel 90 degrees.
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
 Attempting to rotate without fully extending
NOTE
upward may cause damage to stand.
 Video card for portrait display will be
required
screen.
C Adjust the monitor's angle to your preference.
Monitor
Stand
for rotating the image on the
45°
90°
BEFORE YOU OPERATE THE MONITOR 13
130mm
45°