Wendell Side Table
Assembly Instructions
TOOLS REQUIRED BUT NOT INCUDED:
Phillips head screwdriver
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED:
A) Leg x1
E) Wooden Dowel
[10 x 80mm] x2
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights. Any
Rev 1 04.12.22
B) Leg x1
F ) Bolt
[M4 x 10mm] x8
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
unauthorized reproduction, adaptation, distribution or other infringement will be
C) Glass top x1
G) Glass bumper x4
D) Cross-bar x1
Page 1 of 3
Need help?
Do you have a question about the Wendell 69553105 and is the answer not in the manual?
Questions and answers