Advertisement
Quick Links
Advertisement
Related Manuals for Öhlins RXF34
Summary of Contents for Öhlins RXF34
- Page 1 Front Fork RXF34/RXF36 Workshop Manual - 50 h...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS General Warnings SAFETY SYMBOLS In this manual, mounting instructions and other technical documents, Note! important information concerning safety is distinguished by the following When working with the Öhlins product, always read the Vehicle Service Manual. symbols: Note! The shock absorber/front fork/steering damper is an important part of the vehicle The Safety Alert Symbol means: Warning! Your safety is involved. - Page 3 RXF34/RXF36 50-HOUR SERVICE Front Fork RXF34/RXF36 50-Hour Service Note! Record the rebound adjuster setting and the pressure in the positive air chamber and ramp up chamber before service. We recommend using a bike stand to clamp the steering tube when working on the fork.
- Page 4 RXF34/RXF36 50-HOUR SERVICE 3. Remove the nut by using a socket wrench with a 14 mm deep hex socket. 4. Use a socket wrench with a 12 mm deep hex socket to remove the washer and the nut on the lower air valve.
- Page 5 RXF34/RXF36 50-HOUR SERVICE 7. Use tweezers to cautiously remove the foam rings in the lower legs. 8. Carefully clean the foam rings using disc brake cleaner and a paper cloth or rag to remove old suspension fluid and dirt. Inspect for damages and replace if necessary.
- Page 6 RXF34/RXF36 50-HOUR SERVICE 10. Hold the lower legs upside down and clean the wiper seals and the upper bushings with a soft rag. 11. Use a rag wrapped around a long rod or similar to clean the insides of the lower legs.
- Page 7 RXF34/RXF36 50-HOUR SERVICE 13. Use tweezers to carefully re-insert the soaked foam rings into the lower legs. Check that they are mounted corrrectly and not twisted. 14. Clean the stanchion tubes with a paper cloth or soft rag. 15. Reinstall the stanchion tubes into the lower legs.
- Page 8 RXF34/RXF36 50-HOUR SERVICE 16. Inject 5 ml of fork lubrication fluid in spring fork leg and 5 ml in damper fork leg. 17. Reinstall the rebound adjuster nut, knob and screw and tight- en to 10 Nm. Refit the lower valve nut and washer and tighten to 10 18.
- Page 9 Your Öhlins retailer: Öhlins Racing AB Box 722 Phone: +46 (0)8 590 025 00 Fax: +46 (0)8 590 025 80 SE-194 27, Upplands Väsby Sweden www.ohlins.com...