Download
Share
Print this page
Öhlins RXF38 m.2 Workshop Manual
  1. Manuals
  2. Brands
  3. Öhlins Manuals
  4. Bicycle Accessories
  5. RXF38 m.2
  6. Workshop manual

Öhlins RXF38 m.2 Workshop Manual

Front fork
Hide thumbs

Advertisement

Quick Links

Download this manual
Front Fork
RXF38 m.2/m.1
Workshop Manual - 50 h

Advertisement

loading
Need help?

Need help?

Do you have a question about the RXF38 m.2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Öhlins RXF38 m.2

Summary of Contents for Öhlins RXF38 m.2

  • Page 1 Front Fork RXF38 m.2/m.1 Workshop Manual - 50 h...

  • Page 2: Safety Precautions

    SAFETY PRECAUTIONS General Warnings SAFETY SYMBOLS In this manual, mounting instructions and other technical documents, Note! important information concerning safety is distinguished by the following When working with the Öhlins product, always read the Vehicle Service Manual. symbols: Note! The shock absorber/front fork/steering damper is an important part of the vehicle The Safety Alert Symbol means: Warning! Your safety is involved.
  • Page 3 RXF38 M.2/M.1 50-HOUR SERVICE Front Fork RXF38 m.1 50-Hour Service Note! Record the rebound adjuster setting and the pressure in the positive air chamber and ramp up chamber before service. We recommend using a bike stand to clamp the steering tube when working on the fork.
  • Page 4 RXF38 M.2/M.1 50-HOUR SERVICE 8. Use tweezers to cautiously remove the foam rings in the lower legs. 9. Carefully clean the foam rings using disc brake cleaner and a paper cloth or rag to remove old suspension fluid and dirt. Inspect for damages and replace if necessary.
  • Page 5 RXF38 M.2/M.1 50-HOUR SERVICE 11. Hold the lower legs upside down and clean the wiper seals and the upper bushings with a soft rag. 12. Use a rag wrapped around a long rod or similar to clean the insides of the lower legs.
  • Page 6 RXF38 M.2/M.1 50-HOUR SERVICE 14. Hold the lower legs upside down and use a soft rag inside the wiper seals to wipe of any oil residues from previous step. 15. Apply a thin layer of function grease to the inner surfaces of the wiper seals.
  • Page 7 RXF38 M.2/M.1 50-HOUR SERVICE 18. Use fluids in spring and damper fork leg according to table below. It is important to not to overfill as it will affect fork performance. Damper fork leg Spring fork leg Model Fork part no.
  • Page 8 RXF38 M.2/M.1 50-HOUR SERVICE Appendix A Part no of the fork can be found at the bottom of the steering tube. The part no of the fork can also be found on the steerer tube as a QR-code. Use a QR-code...
  • Page 9 RXF38 M.2/M.1 50-HOUR SERVICE...
  • Page 10 Your Öhlins retailer: Öhlins Racing AB Box 722 Phone: +46 (0)8 590 025 00 Fax: +46 (0)8 590 025 80 SE-194 27, Upplands Väsby Sweden www.ohlins.com...

This manual is also suitable for:

Rxf38 m.1