Download
Share
Print this page
Öhlins RXF36 m.2 Workshop Manual
  1. Manuals
  2. Brands
  3. Öhlins Manuals
  4. Bicycle Accessories
  5. RXF36 m.2
  6. Workshop manual

Öhlins RXF36 m.2 Workshop Manual

Front fork - 50 h
Hide thumbs Also See for RXF36 m.2:

Advertisement

Quick Links

Download this manual
Front Fork
RXF36 m.2
Workshop Manual - 50 h

Advertisement

loading

Related Manuals for Öhlins RXF36 m.2

Summary of Contents for Öhlins RXF36 m.2

  • Page 1 Front Fork RXF36 m.2 Workshop Manual - 50 h...

  • Page 2: Safety Precautions

    SAFETY PRECAUTIONS General Warnings SAFETY SYMBOLS In this manual, mounting instructions and other technical documents, Note! important information concerning safety is distinguished by the following When working with the Öhlins product, always read the Vehicle Service Manual. symbols: Note! The shock absorber/front fork/steering damper is an important part of the vehicle The Safety Alert Symbol means: Warning! Your safety is involved.
  • Page 3 RXF36 M.2 50-HOUR SERVICE Front Fork RXF36 m.2 50-Hour Service Note! Record the rebound adjuster setting and the pressure in the positive air chamber and ramp up chamber before service. We recommend using a bike stand to clamp the steering tube when working on the fork.
  • Page 4 RXF36 M.2 50-HOUR SERVICE 3. Remove the nut by using a socket wrench with a 14 mm deep hex socket. 4. Use a socket wrench to remove the nut on the lower air valve. 12 mm nuts have washer 14 mm have not.
  • Page 5 RXF36 M.2 50-HOUR SERVICE 7. Use tweezers to cautiously remove the foam rings in the lower legs. 8. Carefully clean the foam rings using disc brake cleaner and a paper cloth or rag to remove old suspension fluid and dirt. Inspect for damages and replace if necessary.
  • Page 6 RXF36 M.2 50-HOUR SERVICE 10. Hold the lower legs upside down and clean the wiper seals and the upper bushings with a soft rag. 11. Use a rag wrapped around a long rod or similar to clean the insides of the lower legs.
  • Page 7 RXF36 M.2 50-HOUR SERVICE 13. Use tweezers to carefully re-insert the soaked foam rings into the lower legs. Check that they are mounted corrrectly and not twisted. 14. Clean the stanchion tubes with a paper cloth or soft rag. 15. Reinstall the stanchion tubes into the lower legs.
  • Page 8 RXF36 M.2 50-HOUR SERVICE 16. If seal head is blue and piston rod end gold then use 10 ml of fork lubrication fluid in spring and damper fork leg. For all other forks use 5 ml of fork lubrication fluid in spring and damper fork leg. It is important to not to overfill as it will affect fork performance.
  • Page 9 RXF36 M.2 50-HOUR SERVICE...
  • Page 10 Your Öhlins retailer: Öhlins Racing AB Box 722 Phone: +46 (0)8 590 025 00 Fax: +46 (0)8 590 025 80 SE-194 27, Upplands Väsby Sweden www.ohlins.com...