Disassembly Guide
Separating the Front and Back Cases
44
2. Remove the battery cover: pull the battery cover latch downward toward the
bottom of the NPB-40 case and lift the battery cover. See Figure 4, item 1.
3. Remove the batteries.
1 —
2 —
3 —
Figure 4: Installing Batteries
Do the following procedure to separate the NPB-40 front and back cases.
1. Do the procedure in paragraph Prior to Disassembly on page 43.
2. Remove the four screws holding the NPB-40 front and rear cases together.
See Figure 5, items 1 through 4.
Figure 5: NPB-40 Case Screws
Batteries
Battery cover
Battery cover latch