Mitsubishi Electric Mr.SLIM PKH-1.6FKA Technical & Service Manual page 37

(3) Auto vane control
Auto vane position is set to 10 degrees airflow at the start-up of COOL operation. It can then be changed by the remote
controller.
(a) Stop mode (fixed operation)
( i ) At start-up of COOL operation, the auto vane is set to 10 degrees airflow direction.
( ii ) Discharge direction can be changed with
1 Fan speed : LOW
10°
2 Fan speed : HIGH
10°
(b) SWING mode (Only PKH-2.5FKA-E / PKH-3FKA-E / PKH-4FKSA-E)
( i ) The vane motor turns ON when the SWING mode is selected.The vane motor is continuously ON during SWING mode.
<AUTO RETURN>
1 Fan speed : LOW
10°
2 Fan speed : HIGH
10°
When 60 degrees or 70 degrees airflow is selected with the LOW fan speed in COOL operation, "Auto RETURN" will appear
below the temperature display. One hour later, the airflow direction returns to 10 degrees automatically and "AUTO RETURN"
will disappear. If the airflow direction is set to 10 degrees during "AUTO RETURN" indication, the time counting for AUTO
RETURN is cancelled.
button.
30°
60°
AUTO
RETURN
30°
60°
60°
70°
60° 70°
70°
AUTO
RETURN
70°
37
(SWING)
(SWING)