Table of Contents
Advertisement
ADJUSTMENT
This section explains how to adjust the strength equipment. Make sure that all parts are properly tightened each
time the strength equipment is used. Replace any worn parts immediately.
ADJUSTING THE RESISTANCE
To change the amount of resistance, insert the weight
Weight
pin into the desired weight. Make sure that the
Pin
weight pin is fully inserted.
Weight
ADJUSTING THE STARTING POSITION OF THE
PIVOT FRAME
To adjust the starting position of the pivot frame, step
Pivot
on the foot pedal and rotate the pivot frame to the
Frame
desired position. When the pivot frame is in the
desired position, release the foot pedal. Make sure
that the adjustment pin clicks into the pivot
bracket (not shown).
Foot
Pedal
6
Advertisement
Table of Contents
