Side I/O Panel - Dell Studio One 19/1909 Service Manual

Back to Contents Page
Side I/O Panel
Dell Studio One 19/1909 Service Manual
Removing the Side I/O Panel
Replacing the Side I/O Panel
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Side I/O Panel
1. Follow the procedures in
2. Remove the computer cover (see
3. Remove the shield (see
4. Remove the stand (see
5. Remove the left speaker (see
6. Remove the hard drive (see
7. Remove the screw that secures the side I/O panel to the chassis.
8. Lift and pull the side I/O panel from the clamps
NOTE:
9. Disconnect the cables from the connectors (F_AUDIO and SIDE_BOARD_1) on the system board.
10. Slide the side I/O panel away from the clamps and place it in a secure location.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Before You Begin.
Removing the Computer
Removing the Shield).
Removing the Stand).
Removing the Left Speaker).
Removing the Hard Drive).
Make note of the cable routing before you dislodge the cables.
UserManuals.info
Cover).