Removing The Left Side-Panel - Dell Alienware Aurora R3 Service Manual

Service manual
Hide thumbs Also See for Alienware Aurora R3:
Table of Contents

Advertisement

Back to Contents Page
  Left Side-Panel
Alienware Aurora Service Manual
  Removing the Left Side-Panel
  Replacing the Left Side-Panel
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
Do not operate your computer with any cover(s) (including computer panels, bezels, filler brackets, etc.) removed.
WARNING:
To guard against likelihood of electric shock, laceration by moving fan blades, or other unexpected injuries, always unplug your
computer from the electrical outlet before removing the side panel(s).
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
 
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
 Removing the Left Side-Panel
 
1. Follow the instructions in
Before You
NOTE:
Ensure that you remove the security cable from the security cable slot (if applicable).
 
2. Slide the latch to unlock the release panel.
 
3. Lift the release panel to open the left-side panel.
 
4. Slide and lift the left side-panel.
NOTE:
Theater lighting (available only in Alienware Aurora ALX) turns on automatically when the left side-panel is removed.
1
release panel
2
security cable slot
3
latch
4
left side-panel
Begin.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents