Dell Studio One 19/1909 Service Manual page 34

1 screw
3 connector (SIDE_BOARD_1)
Replacing the Side I/O Panel
1. Follow the procedures in
2. To replace the side I/O panel, route the cables back into position and connect them to the connectors (F_AUDIO and SIDE_BOARD_1) on the system
board.
3. Slide the side I/O panel towards the clamps until it is firmly seated.
4. Replace the screw that secures the side I/O panel to the chassis.
5. Replace the hard drive (see
6. Replace the left speaker (see
7. Replace the stand (see
8. Replace the shield (see
9. Replace the computer cover (see
Back to Contents Page
Great user manuals database on
2 connector (F_AUDIO)
Before You Begin.
Replacing the Hard Drive).
Replacing the Left Speaker).
Replacing the Stand).
Replacing the Shield).
Replacing the Computer Cover).
UserManuals.info