Removing The Processor Fan - Dell XPS 410 Service Manual

Follow the removal procedure
Processor Fan
CAUTION:
CAUTION:
NOTICE:
computer's electronic components. You can do so by touching an unpainted metal surface on the computer.

Removing the Processor Fan

1. Follow the procedures in
2. Remove the computer cover (see
3. If your computer includes a card retention mechanism to secure the x16 card, press the release tab downward gently and then pivot the mechanism
upward.
4. Unhook floppy drive cable from the clips on processor shroud and move out of the way.
1 release tab
4 heat sink captive screws (2)
5. Use a long Phillips screwdriver to loosen the two captive screws, one on each side of the heat-sink assembly.
CAUTION:
6. Rotate the heat-sink assembly towards the rear of the computer, and remove it from the computer.
Great user manuals database on
(Removing the I/O Panel) in reverse order, ensuring that the tabs on the top panel, bottom panel, and front panel are secure.
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your
Before You Begin.
Removing the Computer
2 card retention mechanism
The heat-sink assembly may be very hot during normal operation. Be sure that it has had sufficient time to cool before you touch it.
UserManuals.info
Cover).
3 card retention door