I/O-Panel Components; Removing The I/O Panel - Dell XPS 410 Service Manual

10. Replace the computer cover (see
NOTICE:
11. Connect your computer and devices to electrical outlets, and turn them on.
I/O Panel
CAUTION:
CAUTION:

I/O-Panel Components

1 USB port
4 microphone
connector

Removing the I/O Panel

1. Follow the procedures in
2. Remove the computer cover (see
3. If your computer includes a card retention mechanism to secure the x16 card, press the release tab downward gently and then pivot the mechanism
upward.
4. Unhook the floppy drive cable from clips on processor shroud and move it out of the way.
Great user manuals database on
Replacing the Computer
To connect a network cable, first plug the cable into the network port or device and then plug the cable into the computer.
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
2 diagnostic, hard drive activity,
and network lights
5 thermal sensor connector
Before You Begin.
Removing the Computer
UserManuals.info
Cover).
3 headphones connector
6 Integrated audio connector with
jumper block installed
Cover).