System Specifications; Table 13-1 System Specifications - Omron MiniSafe 4800 Series Installation And Operating Manual

13 S
PECIFICATIONS AND
I
NFORMATION
1 3 . 1 S

Table 13-1 System Specifications

Performance:
Protective Height
Object Resolution
Operating Range
Effective Aperture Angle
Safety Output
Response Time
Light Source
Transmitter Indicator Lights
Receiver Indicator Light
Electrical:
Power Input Transmitter:
Power Input Receiver:
Power Supply
Mechanical:
Construction
Cable length
Wiring Connections
Environmental:
Enclosure rating
Operating Temperature
Storage Temperature
Relative Humidity
Vibration
Shock
OMRON Scientific Technologies Inc.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
A
S
YS T EM PE CI FIC AT IO NS
240-1800mm (14/20mm res.), 280-2120mm (30mm Res.), 360-
2040mm (40mm Res.)
14, 20, 30, and 40mm
14mm resolution - 0.3 to 7m (1 to 23 ft.) default; 0.3 to 3m (1 to 10 ft.)
20, 30 and 40mm resolution - 0.3 to 20m (1 to 65 ft.) default; 0.3 to 8m
(1 to 26 ft.)
± 2.5° maximum, transmitter and receiver at operating range greater
than 3 meters per IEC 61496-2.
Two PNP, each output sourcing 625 mA @ 24 VDC, short circuit
protected. (See note 2)
See
Infrared Light Emitting Diode, 880 nm
Active (Yellow)
MACHINE RUN/Stop (green/red), INTERLOCK/Alarm (Yellow),
Blanking (amber)
24 VDC ± 20% 285 mA max.
24 VDC ± 20% 1.7A max. (receiver 450mA + OSSD1 625 mA max. +
OSSD2 625 mA max. ). (See note 1)
Must meet requirements of IEC 60204-1 and IEC 61496. Omron STI
part number 42992 or equivalent. (See note 1 ).
Polyurethane powder painted aluminum
Available in 10, 15, and 30 m lengths, unshielded. (See note 3).
M12 connectors: 5-pin receiver and 5-pin transmitter.
IP65
-10 to 55° C (14 to 131 F)
-25 to 75° C (-14 to 167 F)
95% maximum, non-condensing
10 - 55Hz maximum on all 3 axes
10g for 0.016 seconds; 1,000 shocks for each of three axes
DDITIONAL
Table 13-2
39
13
© OMRON STI 0613 PN99804-0060 Rev. B