Cross Talk Mitigation; Figure 9-4 Correct Mounting Example With Proper Alignment; Figure 9-5 Minimum Distance From A Reflective Surface As A Function Of Range - Omron MiniSafe 4800 Series Installation And Operating Manual

Figure 9-4 Correct Mounting Example with Proper Alignment

This example shows the minimum distance from the reflective surface, d, to one side of the beam
center line.

Figure 9-5 Minimum Distance from a Reflective Surface as a Function of Range

9 . 2 C
To mitigate interference from other light curtains, the MS4800 has two possible scan codes, A and B.
The transmitter and receiver units must be set to the same scan code for the receiver to enter the
MACHINE RUN state.
OMRON Scientific Technologies Inc.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Approach direction
Interruption
Central beam
Transmitter
d
Reflective Surface
Perimeter of danger area
1.3m
1.1m
900
700
d(mm)
500
300
100
0.3m 2m 6m
0 4m
T M
RO SS ALK ITI G ATI ON
Beam Angle, a
a
Light beam interrupted
Receiver
Reflection
10m
8m 12m 14m
Range (m)
27
18m 20m
16m
© OMRON STI 0613 PN99804-0060 Rev. B