Removing The Power Button Board; Replacing The Power-Button Board - Dell Inspiron N4010 Service Manual

Back to Contents Page
Power Button Board
Dell™ Inspiron™ N4010 Service Manual
Removing the Power Button Board
Replacing the Power Button Board
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the Power Button Board
1. Follow the instructions in
2. Remove the battery (see
3. Follow the instructions from
4. Remove the module cover (see
5. Remove the memory module(s) (see
6. Remove the keyboard (see
7. Remove the palm rest (see
8. Turn the palm rest over.
9. Remove the two screws that secure the power button board to the palm rest.
NOTE: The power button board cable is affixed to the palm rest.
10. Carefully release the power button board cable from the palm rest.
1 screws (2)
Replacing the Power Button Board
1. Follow the instructions in
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
step 3 to step 4 in Removing the Optical
Removing the Module
Removing the Memory
Removing the Keyboard).
Removing the Palm Rest).
2 power button board
Before You Begin.
UserManuals.info
Removing the
Drive.
Cover).
Module(s)).
Battery) before working inside the