Replacing The System Board - Dell Inspiron N4010 Service Manual

1 screws (9)
3 AC adapter cable connector 4 display cable grounding screw
5 display cable
15. Lift the system board assembly to disconnect the connector on the system board from the connector on the daughter board.
1 system board
16. Turn the system board assembly over.
17. Follow the instructions from
18. Remove the thermal cooling assembly (see
19. Remove the processor module (see
Replacing the System Board
1. Follow the instructions in
2. Replace the processor module (see
3. Replace the thermal cooling assembly (see
4. Follow the instructions from
5. Turn the system board assembly over.
6. Align the connectors on the system board with the slots on the computer base.
7. Gently press the system board to connect the connector on the system board to the connector on the daughter board.
Great user manuals database on
2 speakers cable connector
step 3 to step 5 in Removing the Hard
Removing the Thermal Cooling
Removing the Processor Module).
Before You Begin.
Replacing the Processor Module).
Replacing the Thermal Cooling
step 4 to step 5 in Replacing the Hard
UserManuals.info
Drive.
Assembly).
Assembly).
Drive.