Logik LHFiP2010E Quick Start Manual

Micro Hi-Fi with Docking for iPod
Quick Start Guide
LHFiP2010E
Congratulations
on the purchase of your new
Logik Micro HiFi With Docking For iPod.
We recommend that you spend some time reading this
instruction manual in order to fully understand all the
operational features it o ers.
Read all the safety instructions carefully before use and
keep this instruction manual for future reference.
1 1
S S
Unpacking
tep tep
Remove all packaging from the unit. Retain the packaging.
If you dispose of it please do so according to any local
regulations.
Main Unit Speakers x 2
Remote Control Battery
STANDBY/ON
TIMER ID3/MO./ST. BAND
FUNCTION
iPod/
MEM/C-ADJ. MENU ENTER
SLEEP SKIP/TUNE SEARCH
INTRO PRESET/FOLDER
EQ
REPEAT RANDOM
MUTE VOLUME
Instruction Manual Quick Start Guide
2 2
S S
Battery
tep tep
Remove the insulating mylar
strip from the battery if the
battery is being used for the rst
time. It is located at the bottom
back side of the remote control.
3 3
S S
Connection
tep tep
Connecting the Speakers
Connect the speaker cables at the back of the speakers to
the speaker sockets (L/R) at the back of unit.
speaker (L) main unit speaker (R)
4 4
S S
Power On
tep tep
1 Connecting to the Mains Socket
Connect the mains cable at the rear of the main unit to
the mains socket.
2 Switching the Unit into Standby Mode
Switch the POWER ON/OFF switch at the rear of the
main unit to the "ON" position.
3 Switching the Unit ON
Press the STANDBY/ON button on the remote
control to switch the unit on.
3
2
STANDBY/ON
STANDBY/ON
TIMER DISPLAY FM/MW
1
FUNCTION
MENU ENTER
SLEEP SKIP/TUNE SEARCH
INTRO PRESETS
main unit To Mains
EQ
REPEAT RANDOM
socket
MUTE VOLUME
6 6
S S
Basic Operation
tep tep
Selecting Modes Radio Operation
1. Press the STANDBY/ON button to 1. Press the STANDBY/ON
switch the unit on. unit on.
2. Press the FUNCTION button to the TUNER
2. Press the FUNCTION button
mode.
repeatedly to switch between modes
3. Press the FM/MW button to select a band (MW
(CD, iPod, AUX or TUNER).
/ FM).
Searching for a Station Manually
• To tune for weak station, press the SKIP/TUNE
SEARCH
reach the correct frequency or the reception is
at its best.
STANDBY/ON
STANDBY/ON
TIMER DISPLAY FM/MW
Searching for a Station Automatically
FUNCTION
• Press and hold the SKIP/TUNE SEARCH
MENU ENTER buttons until the tuner starts searching for a
station. After tuning into a station, the search
SLEEP SKIP/TUNE SEARCH
stops.
INTRO PRESETS
• The search may not stop at a station with a very
FUNCTION
EQ
weak signal.
REPEAT RANDOM
MUTE VOLUME
T T
ip: ip:
You will nd that there are many exciting features available.
To get to know all these features, please take some time to read the instruction manual provided.
5 5
S S
Setting The Clock
tep tep
Setting the clock can only be done in Standby mode.
1. Press and hold the MENU button and then press the
SKIP/TUNE SEARCH buttons to select the 12-hour
or 24-hour time format on the display.
2. Press the MENU button to con rm the time format. The
hour digits will ash.
3. Press the SKIP/TUNE SEARCH buttons to adjust
the hour digits and then press the MENU button to
con rm. The minute digits will ash.
4. Press the SKIP/TUNE SEARCH
buttons to adjust
the minute digits and then press the MENU button to
con rm and nish clock setting.
STANDBY/ON
TIMER DISPLAY FM/MW
MENU
FUNCTION
SKIP/TUNE SEARCH
MENU ENTER
SLEEP SKIP/TUNE SEARCH
INTRO PRESETS
EQ
REPEAT RANDOM
MUTE VOLUME
button to turn the
STANDBY/ON
STANDBY/ON
TIMER DISPLAY
FUNCTION
buttons continuously until you
MENU
SLEEP SKIP/TUNE SEARCH
INTRO PRESETS
FUNCTION EQ
REPEAT
MUTE VOLUME
SKIP/TUNE SEARCH
(P.N.: 227-2275DN-123)
FM/MW
FM/MW
ENTER
RANDOM