ADJUSTMENT
Setting the cutting height
As shown in Fig 15
CAUTION! Adjust the cutting height only
when the engine is switch off the spark plug
Boot has been pulled.
The cutting height is centrally adjusted with
Cutting height adjusting handle. Different
cutting Heights can be selected.
Pull the adjusting handle out and select the
desired cutting height. The handle snaps Into
the desired position.
From position 1 to position 7. The cutting
height range from 25mm to 75 mm.
Setting required
NOTE: This lawn mower has four functions. These functions can be
converted by changing accessory setting. Please see the following
chart for detail setting.
To convert mower
For rear discharging
For rear bagging
For mulching
For side discharging
10
function
mulching plug
×
×
√
√
ENGLISH
ENGLISH
Grass bag
×
√
×
×
"√": installed
29
28
FIG 15
side discharge duct
×
×
×
√
"×" :removed