Lennox PCUS User Manual page 8

Table of Contents

Advertisement

9.
Press the Mode key again to go to time band 2. Leaving the desired action on for now, proceed with setting the
switch-off time which in our example is 12.00, ignoring the setting of the speed and temperature.
The photo below shows what is indicated in this point
10.
Press the Mode key to move to the setting of band 3 and select the ON value as the desired action, the desired
set at 20.0 ° C and the low speed as speed.
The photo below shows what is indicated in this point
11.
Press the Mode key to move to setting band 4. Leaving the desired action to On for now, proceed with setting
the switch-off time which in our example is 5.30 pm, ignoring the setting of the speed values and temperature.
The photo below shows what is indicated in this point
12.
Press the Mode key to switch to the setting of band 1 on Saturday identified by the wording Week 6 and set
the desired action to OFF
13.
By pressing the Mode key again, you move to setting band 2 on Saturday identified by the wording Week 6
and set the desired action to OFF
14.
By pressing the Mode button again, you move to setting band 3 on Saturday identified by the wording Week 6
and set the desired action to OFF
15.
By pressing the Mode button again, you move to setting the band 4 on Saturday identified by the wording Week
6 and set the desired action to OFF
16.
By pressing the Mode button again, you move to setting band 1 on Sunday identified by the word Week 7 and
set the desired action to OFF
17.
By pressing the Mode button again, you move to setting band 2 on Sunday identified by the word Week 7 and
set the desired action to OFF
8
www.lennoxemea.com
PCUS Thermostat - User Manual - 0821EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pcusm

Table of Contents