Attaching The Water Block (Option 2: Geforce Rtx 4080 Tuf) - EK-Quantum Vector2 Strix/TUF RTX 4080 D-RGB User Manual

ATTACHING THE WATER BLOCK (Option 2: GeForce RTX 4080 TUF)

Screws must be present in the places marked on the picture.
STEP 2
STEP 1
Carefully position the water block with preinstalled standoffs on the
graphics card. During this process, make sure you have aligned the
mounting holes of the PCB with the holes of the water block.
STEP 1
- 14 -
Pay attention not to use too much force when pressing
the block down to the PCB since chip dies are prone
to cracking.
Before attaching the PCB to the Water Block, make sure
all the Thermal Pads are placed correctly!