ITS Telecom CelluLine CGW-T Installation And Programming Manual page 16

LCD Message
CGW-T received 3 times an
Enter PUK code
incorrect PIN code.
Registration process after the
Registration... mobile network has been
found.
LCD shows signal level in
S=X % intervals of 20% (20%, 40%,
60%, 80%, 100%).
Name of Operator (read from
Name operator
mobile network).
Calling... CGW-T dials to destination.
Connected When called party answers.
Disconnected End of call.
CGW-T gets call from
Incoming Call
network.
10
Description
Request the PUK code from
your local GSM operator and
enter it into the CGW-T.
Wait till registration phase is
finished.
If 20% or No signal, move the
antenna to another location
with a better reception.
No action is needed.
Wait.
No action needed.
No action needed.
No action needed.
CelluLine CGW-T Installation and Programming Manual
Action