Mitsubishi Electric CAHV-R450YA-HPB Installation & Operation Manual page 67

4
Unit1
Unit initial set
Control pattern
Unit Setting
Function setting
Storage Monitor
F1 F2
5
Unit1
Function setting
M-NET address
Function No.
Data
Function
F1 F2
Unit1
Function setting
M-NET address
Function No.
Data
Function
6
Unit1
Function setting
M-NET address
Function No.
Data
Function
F1 F2
Select "Function setting" from the Unit initial set menu, and press the [Select]
FRI
button.
F3 F4
The Function setting screen will be displayed.
FRI
Press the [F1] or [F2] button to select the connected unit "M-NET address",
"Function No." or "Data", and then press the [F3] or [F4] button to change to the
desired setting.
Set / Conf
After changing to the desired setting, press the [Select] button.
The setting data transmission screen will be displayed.
F3 F4
To check the current settings, set the "M-NET address" or "Function No." of the
connected unit to be checked, select "Conf" in "Function" and press the [Select] button.
The screen indicating that the confirmation is being processed will be displayed and the
data will be displayed when checking is completed.
FRI
Set / Conf
Once data transmission is completed, the screen indicating that the settings have
FRI
been made will be displayed.
To continue making settings, press the [Return] button to return to the screen in
procedure 3. Use the same procedure to set other connected unit and Data
Set / Conf
settings.
Navigating through the screens
■ To return to the Service menu ...... [Menu] button
F3 F4
■ To return to the previous screen ...... [Return] button
67